Medical device-related pressure injury (MDRPI) is a kind of pressure injury that occurs in the course of diagnosis and treatment, and its appearance is similar to that of medical device. Neonatal intensive care unit (NICU) infants are more likely to develop MDRPI than children and adults because of the physiological characteristics of skin and the influence of disease. At present, the occurrence of MDRPI in NICU infants is attracting worldwide attention. Its treatment and nursing consume a large amount of medical resources, which not only affect the outcome of the disease, but also increase the economic burden of the family and society. This article summarizes the MDRPI from three aspects: summary, influencing factors, and evaluation tools. It is expected that NICU nurses will carry out large sample clinical investigation of MDRPI in the future, so as to provide a reference for risk prediction model and risk assessment tools to identify high-risk infants and take effective measures in advance to reduce the incidence of MDRPI.
ObjectiveTo analyze the current situation and international research focuses on the study of medical device risk management. MethodsTo retrieve medical device risk management literature information cited from 2002 to 2011 in PubMed such as high-frequency MeSH; analyze current situation and research focuses of medical device risk management by using bibliometrics, bibliographic item co-occurrence matrix builder (BICOMB), and graphical clustering toolkit (gCluto) for quantitative analysis, high-frequency MeSH term papers cluster visualization analysis. ResultsA total of 7 073 published studies were retrieved, basically suggesting a gradually increasing trend of the number of published papers. The top 3 numbers of first authors' papers referred to three countries: the United States, Britain and Germany, while China ranked twelfth. The top 3 numbers of journal articles referred to the United States, Britain and Holland, while China ranked twenty-second. Twenty journals published more than 50 papers, and all these journals were clinical journals. Thirty-three authors published no less than 5 papers, with the maximum of 18 articles. Totally, there were 124 highfrequency MeSHs. The high-frequency MeSHs were classified into 6 categories by using double cluster analysis: kinds 0 to 4 included risk report, risk analysis, risk assessment and methodology of heart valve prosthesis, coronary stents, peripheral vascular stents, implantable defibrillators and other life support device, surgical repair surgical flaps and minimal invasion surgical device such as laparoscopy; kind 5 focused on safety management, risk control, organization and implementation and other related research based on prevention and control of medical device adverse reaction, medical errors, occupation exposure, and equipment failure. ConclusionThe analysis on international literature on medical device risk management basically shows a gradually increasing trend; most studies published in the clinical medicine journals; research focus on risk assessment, safety management and quality improvement in the application such as angioplasty, artificial prosthesis replacement, plastic surgery, minimally invasive surgery and critical care medicine, and radiology diagnosis and treatment; implantable, life-supported invasive and radiological devices as the main research subject; and characteristics include closely combination between medical device risk management and the application of safe and effective, quality improvement systems for clinical diagnosis and treatment.
Objective To study the USA government’s administrative system about medical device standards as well as the standard making. Methods The relevant documents, regulations, website that USA Food and Drug Administration announced were extensively reviewed, knowing the USA medical device standards synthetically. Results The USA standards system of medical device included regulatory requirements and voluntary consensus standards. This article simply introduced the laws, regulations, performance standards and consensus standards. Conclusion The USA’s administrative system about medical device standards as well as many standards can be referenced.
Objective To learn the current status, publication standards, formats, and contents of medical advertisements published in journals in China, and to discuss the possibility of evidence-based evaluation and standards for advertisement publication. Methods We handsearched Issue One, 2008 of 222 core medical journals indexed by A Guide to the Core Journals of China (2004 version) and the most important databases to index top 20% academic journals to identify basic journal information and the content of their advertisements. The general and trade name of the drugs, and the advertisements and production license number of the drugs and devices were collected. We used EXCEL software for data input and SPSS 13.0 for statistical analyses. Results Two-hundred and eighteen journals were handsearched and evaluated. The other 4 journals were excluded because the print version could not be found. A total of 1,201 advertisements were published in 159 (72.9%) of the journals, with the average of 5.5 (range of 1-37) for each journal. Of the advertisements, 910 (75.8%) were related to medical drugs or devices, including 598 (49.8%) drug and 312 (26.0%) medical device advertisements. Most of them were published in clinical and special medical journals. There were 518 (86.6%) drug advertisements which had both advertisement license and production license number, but only 116 (36.1%) medical device advertisements stated the advertisement license and production license number. Conclusion The medical drug advertisements published in core medical journals in China lack sufficient publication standards, and medical device advertisements are even worse. We cannot conclude the efficacy, safety, and cost-effectiveness of advertisement production according to the current limited, unclear, and highly-commercialized advertisements.
Regulatory science of medical devices serves the scientific research and regulatory activities for supervision of medical devices. Principles of science and transparency and conduction of evidence-based study, which is advocated in Evidence-based science(EBS), also apply to regulatory science of medical devices, including using evidence-based scientific tools and methods to demonstrate the safety and effectiveness, as well as quality, efficacy and cost-effectiveness of total life cycle of medical products, target customers, and scope. EBS provides both new methods and tools for regulatory science for medical devices, and provides a new basis for further scientific regulatory decisions.
Active medical device is a kind of medical device which is widely used. In order to realize the goal of high-quality development, product with high reliability is a necessary requirement for the domestic active medical device industry. By means of literature research, data collection, field research, materials comprehensive combing and analysis, this paper systematically analyzes and studies the current situations and the existing problems of reliability and evaluation from the dimensions of Chinese active medical device industry policy, enterprise situation and evaluation method. In addition, by considering the technical characteristics of reliability work, concrete suggestions for solving the problems are given from the directions of standard and guiding principle, so as to provide reference for active medical device industry to develop scientific and objective reliability technical standard system and guiding principle, which are in accord with the current characteristics of Chinese active medical device industry and supervision.
To design a new suit of instruments for meniscal suture with tondon, and then authenticate their feasibil ity and the therapeutic effect of the new technique. Methods Instruments were developed, including new ones and others which was improved according to the current instruments. From October 2005 to December 2006, 45 patients with meniscal injury were treated by meniscal suture with tendon. There were 29 males and 16 females, aged 17-40 years (mean 28 years). Injury was caused by sports in 33 cases, by traffic accident in 5 cases, by fall ing in 3 case and others in 4 cases. The disease course was 3 days to 6 months (mean 2 months). There were 23 cases accompanying with anterior cruciate l igament injury and 6 cases accompanying with posterior cruciate l igament injury. E-MRI showed 2 cases of degree II and 43 cases of degree III. Arthroscope showed that injury was at medial meniscus in 39 cases and at lateral meniscus in 6 cases. The pre-operationalLysholm score was 53.0 ± 10.3. Autogeneic or xenogenic tendon was made into suture l ine guided by stitch at the two ends. Thetherapeutic effect of the new technique was authenticated by cl inical results, including the change of symptoms and phy sical signs, and by comparing the pre-operational Lysholm score with the post one. Results Nineteen pieces of instruments weredeveloped. All the operation were successful, with no harm to nerves and vessels. The follow-up was 6 months to 24 mo nths (mean15 months). At the last follow-up, all the symptoms disappeared, including pain, swell ing and locking, etc. The Lysholm sc oreafter 6 months of operation was 87.8 ± 9.2, showing statistically significant difference when compared with per-operati on ( P lt; 0.01). Conclusion It is feasible to suture injured menisci with the new instruments and technique. It is an effective way to repair menisci with tendon according to the short-term results.
In 2019, the national government issued the document "Implementation Plan for Supporting the Construction of the Boao Lecheng International Medical Tourism Pilot Area", which allowed the use of innovative drugs and medical devices in medical institution of Boao Lecheng. These medical products had been designed to meet urgent clinical requirements and had been approved by regulatory authorities overseas. Through the use of these medical products, real-world data were generated in the routine clinical practice, based on which real-world evidence might be produced for regulatory decision-making by using scientific and rigorous methods. In March 2020, the first medical device product using domestic real-world data was approved, suggesting that the real-world data initiative in Boao Lecheng achieved initial success. This work also provided important experience for promoting the practice of medical device regulatory decision-making based on real-world evidence in China. Here, we shared the preliminary experiences from the study on the first approved medical device product and discussed the issues on developing a real-world data research framework in Boao Lecheng in attempt to offer insights for future studies.
The emergence of new-generation artificial intelligence technology has brought numerous innovations to the healthcare field, including telemedicine and intelligent care. However, the artificial intelligent medical device sector still faces significant challenges, such as data privacy protection and algorithm reliability. This study, based on invention patent analysis, revealed the technological innovation trends in the field of artificial intelligent medical devices from aspects such as patent application time trends, hot topics, regional distribution, and innovation players. The results showed that global invention patent applications had remained active, with technological innovations primarily focused on medical image processing, physiological signal processing, surgical robots, brain-computer interfaces, and intelligent physiological parameter monitoring technologies. The United States and China led the world in the number of invention patent applications. Major international medical device giants, such as Philips, Siemens, General Electric, and Medtronic, were at the forefront of global technological innovation, with significant advantages in patent application volumes and international market presence. Chinese universities and research institutes, such as Zhejiang University, Tianjin University, and the Shenzhen Institute of Advanced Technology, had demonstrated notable technological innovation, with a relatively high number of patent applications. However, their overseas market expansion remained limited. This study provides a comprehensive overview of the technological innovation trends in the artificial intelligent medical device field and offers valuable information support for industry development from an informatics perspective.