Objective To review the recent advances in the application of graphene oxide (GO) for bone tissue engineering. Methods The latest literature at home and abroad on the GO used in the bone regeneration and repair was reviewed, including general properties of GO, degradation performance, biocompatibility, and application in bone tissue engineering. Results GO has an abundance of oxygen-containing functionalities, high surface area, and good biocompatibility. In addition, it can promote stem cell adhesion, proliferation, and differentiation. Moreover, GO has many advantages in the construction of new composite scaffolds and improvement of the performance of traditional scaffolds. Conclusion GO has been a hot topic in the field of bone tissue engineering due to its excellent physical and chemical properties. And many problems still need to be solved.
Objective To explore the method of preparing the electrospinning of synthesized triblock copolymers of ε-caprolactone and L-lactide (PCLA) for the biodegradable vascular tissue engineering scaffold and to investigateits biocompatibil ity in vitro. Methods The biodegradable vascular tissue engineering scaffold was made by the electrospinning process of PCLA. A series of biocompatibil ity tests were performed. Cytotoxicity test: the L929 cells were cultured in 96-wellflat-bottomed plates with extraction media of PCLA in the experimental group and with the complete DMEM in control group, and MTT method was used to detect absorbance (A) value (570 nm) every day after culture. Acute general toxicity test: the extraction media and sal ine were injected into the mice’s abdominal cavity of experimental and control groups, respectively, and the toxicity effects on the mice were observed within 72 hours. Hemolysis test: anticoagulated blood of rabbit was added into the extracting solution, sal ine, and distilled water in 3 groups, and MTT method was used to detect A value in 3 groups. Cell attachment test: the L929 cells were seeded on the PCLA material and scanning electron microscope (SEM) observation was performed 4 hours and 3 days after culture. Subcutaneous implantation test: the PCLA material was implanted subcutaneously in rats and the histology observation was performed at 1 and 8 weeks. Results Scaffolds had the characteristics of white color, uniform texture, good elasticity, and tenacity. The SEM showed that the PCLA ultrafine fibers had a smooth surface and proper porosity; the fiber diameter was 1-5 μm and the pore diameter was in the range of 10-30 μm. MTT detection suggested that there was no significant difference in A value among 3 groups every day after culturing (P gt; 0.05). The mice in 2 groups were in good physical condition and had no respiratory depression, paralysis, convulsion, and death. The hemolysis rate was 1.18% and was lower than the normal level (5%). The SEM showed a large number of attached L929 cells were visible on the surface of the PCLA material at 4 hours after implantation and the cells grew well after 3 days. The PCLA material was infiltrated by the inflammatory cells after 1 week. The inflammatory cells reduced significantly and the fiber began abruption after 8 weeks. Conclusion The biodegradable vascular tissue engineering scaffold material made by the electrospinning process of PCLA has good microstructure without cytotoxicity and has good biocompatibil ity. It can be used as an ideal scaffold for vascular tissue engineering.
Objective Mechanical stimulation and inductive factors are both crucial aspects in tissue engineered cartilage. To evaluate the effects of mechanical stimulation combined with inductive factors on the differentiation of tissue engineered cartilage. Methods Bone marrow mesenchymal stem cells (BMSCs) were isolated from newborn porcine (aged7 days and weighing 3-6 kg) and expanded in vitro. The BMSCs at passage 2 were seeded onto a scaffold of poly (lactic-coglycol ic acid) (PLGA) in the concentration of 5 × 107/mL to prepare cell-scaffold composite. Cell-scaffold composites were cultivated in a medium with chondrocyte-inducted factors (group A), in a vessel with mechanic stimulating only (group B), or mechanic stimulating combined with chondrocyte-inducted factors (group C) (parameters of mechanics: 1 Hz, 0.5 MPa, and 4 hours/day). Cell-scaffold composite and auto-cartilage served as positive control (group D) and negative control (group E), respectively. After 4 weeks of cultivation, the thickness, elastic modulus, and glycosaminoglycan (GAG) content of composites were measured. Additionally, BMSCs chondrogenic differentiation was assessed via real-time fluorescent quantitative PCR, immunohistochemistry, and histological staining. Results The thickness, elastic modulus, and maximum load in group C were significantly higher than those in groups A and B (P lt; 0.05). In groups A, B, and C, cartilage lacuna formation, GAG expression, and positive results for collagen type II were obsersed through HE staining, Safranin-O staining, and immunohistochemistry staining. The dyeing depth was deeper in group A than in group B, and in group C than in groups A and B; group C was close to group E. The GAG content in group C was significantly higher than that in groups A and B (P lt; 0.05). Real-time fluorescent quantitative PCR revealed that mRNA expressions of collagen type I, collagen type II, and GAG in group C were significantly higher than those in groups A and B (P lt; 0.05), and in group A than in group B (P lt; 0.05). Conclusion Mechanical stimulation combined with chondrocyte inductive factors can enhance the mechanical properties of the composite and induce higher expression of collagen and GAG of BMSCs.
Objective To fabricate a novel gelatinchondroitin sulfate-sodium hyaluronate tri-copolymer scaffold and to confirm the feasibility of serving as ascaffold for cartilage tissue engineering. Methods Different scaffolds was prepared with gelatin-chondroitin sulfatesodium hyaluronate tri-copolymer by varying the freezing temperatures (-20℃,-80℃ and liquid nitrogen). Pore size, porosity, inter pores and density were observed with light microscopy and scanning electron microscopy (SEM). The load-stiffness curves were compared between different scaffolds and normal cartilage. The number of MSCs attaching to different scaffolds and the function of cells were also detected with MTT colorimetric microassay. Results The pore size was 300±45, 230±30 and 45±10 μm; the porosity was 81%, 79% and 56%; the density was 9.41±0.25, 11.50±0.36 and 29.50±0.61 μg/mm3 respectively in different scaffolds fabricated at -20℃,-80℃ and liquid nitrogen; the latter two scaffolds had nearly the same mechanical property with normal cartilage; the cell adhesion rates were 85.0%, 87.5% and 56.3% respectively in different scaffolds and the scaffolds can mildly promote the proliferation of MSCs. Conclusion Gelatin-chondroitin sulfatesodium hyaluronate tricopolymer scaffold fabricated at -80℃ had proper pore size, porosity and mechanical property. It is a novel potential scaffold for cartilage tissue engineering.
【Abstract】 Objective To compare the properties of collagen membranes before and after crossl inked and to establ ish the foundation of appl ication of collagen membranes. Methods Fresh bovine tendons were separated and collagen was extracted by washing, smashing and acetic acid dissolving. The collagen protein was determined by ultraviolet spectrophotometer and its characteristics were analyzed by SDS-polyacrylamide gel electrophoresis (SDS-PAGE), wavelength scanning and amino acids detecting. Collagen membranes were produced by lyophil ization. And then the biocharacteristics of the membranes before and after glutaraldehyde crossl inked were compared. BMSCs separated from volunteer’s bone marrow were seeded on collagen membranes before and after crossl inked by 2×103 in 100 μL medium, seven days after culture, the absorption spectrum of BMSCs was examined, and BMSCs were observed by scanning electron microscope (SEM). Results The contents of collagen protein were 2 mg/mL. The maximum absorption wave length appeared at about 230 nm. SDS-PAGE suggested that molecularweight of main bands was more than 66.2×103, the same as collagen marker from calf skin. There were 21.47% glycine, 12.04% pral ine and 10.18% hydroxyprol ine. No tryptophan was found. Before crossl inked, collagen membranes were in shape of white sponges and with big holes and the range of pH value was from 4.5 to 5.0. SEM showed reticular conformation and pore structure of collagen membranes, but the bore diameter was bigger. Their water-absorbing capacity was 61 times as much as their weight. The mechanical strength was 210 g/cm3. The dissolution time of collagenase was 90 minutes. After crossl inked, collagen membranes became thin, colorless, semi-transparent and compact with better tenacity. Under SEM, compact collagen fiber appeared reticular. There was lower water-absorbing capacity and pH value ranged from 6.5 to 7.0. The mechanical strength was 3 400 g/cm3 and the dissolution time of collagenase became longer. BMSCs could grow better either on before-crossl inked collagen membranes or on after-crossl inked ones. Conclusion As biomaterial scaffolds, after crossl inked collagen membranes were better than before-crossl inked ones.
Objective To study the mechanism of ectopic osteogenesis of nacre/Polylactic acid (N/P) artificial bone combined with allogenic osteoblasts, and to explore the possibility as a scaffold material of bone tissue engineering. Methods The allogenic- osteoblasts seeded onto N/P artificial bone were co-cultured in vivo 1 week.The N/P artificial bone with allogenic osteoblasts were implanted subcutaneously into the left back sites of the New Zealand white rabbits in the experimental group and the simple N/P artificial bone into the right ones in the control group. The complexes were harvested and examined by gross observation, histologic analysis and immunohistochemical investigation 2, 4 and 8 weeks after implantation respectively.Results In experimental group, the osteoid formed after 4 weeks, and the mature bone tissue withbone medullary cavities formed after 8 weeks; but in control group there was nonew bone formation instead of abundant fibrous tissue after 4 weeks, and more fibrous tissue after 8 weeks.Conclusion N/P artificial bone can be used as an optical scaffold material of bone tissue engineering.
Objective To explore the effect of tissue engineered cartilage reconstructed by using sodium alginate hydrogel and SIS complex as scaffold material and chondrocyte as seed cell on the repair of full-thickness articular cartilage defects. Methods SIS was prepared by custom-made machine and detergent-enzyme treatment. Full-thickness articularcartilage of loading surface of the humeral head and the femoral condyle obtained from 8 New Zealand white rabbits (2-3weeks old) was used to culture chondrocytes in vitro. Rabbit chondrocytes at passage 4 cultured by conventional multipl ication method were diluted by sodium alginate to (5-7) × 107 cells/mL, and then were coated on SIS to prepare chondrocyte-sodium alginate hydrogel-SIS complex. Forty 6-month-old clean grade New Zealand white rabbits weighing 3.0-3.5 kg were randomized into two groups according to different operative methods (n=20 rabbits per group), and full-thickness cartilage defect model of the unilateral knee joint (right or left) was establ ished in every rabbit. In experimental group, the complex was implanted into the defect layer by layer to construct tissue engineered cartilage, and SIS membrane was coated on the surface to fill the defect completely. While in control group, the cartilage defect was filled by sodium alginate hydrogel and was sutured after being coated with SIS membrane without seeding of chondrocyte. General condition of the rabbits after operation was observed. The rabbits in two groups were killed 1, 3, 5, 7, and 9 months after operation, and underwent gross and histology observation. Results Eight rabbits were excluded due to anesthesia death, wound infection and diarrhea death. Sixteen rabbits per group were included in the experiment, and 3, 3, 3, 3, and 4 rabbits from each group were randomly selected and killed 1, 3, 5, 7, and 9 months after operation, respectively. Gross observation and histology Masson trichrome staining: in the experimental group, SIS on the surface of the implant was fused with the host tissue, and the inferface between them disappeared 1 month after operation; part of the implant was chondrified and the interface between the implant and the host tissue was fused 3 months after operation; the implant turned into fibrocartilage 5 months after operation; fiber arrangement of the cartilage in theimplant was close to that of the host tissue 7 months after operation; cartilage fiber in the implant arranged disorderly andactive cell metabol ism and prol iferation were evident 9 months after operation. While in the control group, no repair of thedefect was observed 9 months after operation. No obvious repair was evident in the defects of the control group within 9months after operation. Histomorphometric evaluation demonstrated that the staining intensity per unit area of the reparative tissue in the defect of the experimental group was significant higher than that of the control group at each time point (P lt; 0.05), the chondrification in the experimental group was increased gradually within 3, 5, and 7 months after operation (P lt; 0.05), and it was decreased 9 months after operation comparing with the value at 7 months after operation (P lt; 0.05). Conclusion Constructed by chondrocyte-sodium alginate hydrogel-SIS in complex with surficial suturing of SIS membrane, the tissue engineered cartilage can in-situ repair cartilage defect, promote the regeneration of cartilage tissue, and is in l ine with physiological repair process of articular cartilage.
Objective To study the feasibil ity of preparation of the poly-D, L-lactide acid (PDLLA) scaffolds treated by ammonia plasma and subsequent conjugation of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides via amide l inkage formation. Methods PDLLA scaffolds (8 mm diameter, 1 mm thickness) were prepared by solvent casting/particulate leaching procedure and then treated by ammonia plasma. The consequent scaffolds were labeled as aminated PDLLA (A/ PDLLA). The pore size, porosity, and surface water contact angle of groups 0 (un-treated control), 5, 10, and 20 minutes A/ PDLLA were measured. A/PDLLA scaffolds in groups above were immersed into the FITC labelled GRGDS aqueous solutionwhich contain 1-[3-(dimethylamino) propyl]-3-ethylcarbodiimide hydrochloride (EDC.HCl) and N-hydroxysuccinimide(NHS), the molar ratio of peptides/EDC.HCL /NHS was 1.5 ∶ 1.5 ∶ 1.0, then brachytely sloshed for 24 hours in roomtemperature. The consequent scaffolds were labelled as peptides conjugated A/PDLLA (PA/PDLLA). The scaffolds in groups 0, 5, 10, and 20 minutes A/PDLLA and groups correspondingly conjugation of peptides were detected using X-ray photoelectron spectroscopy (XPS). The scaffolds in groups of conjugation of peptides were measured by confocal laser scanning microscope and high performance l iquid chromatography (HPLC), un-treated and un-conjugated scaffolds employed as control. Bone marrow mesenchymal stem cells (BMSCs) from SD rats were isolated and cultured by whole bone marrow adherent culture method. BMSCs at the 3rd–6th passages were seeded to the scaffolds as follows: 20 minutes ammonia plasma treatment (group A/PDLLA), 20 minutes ammonia plasma treatment and conjugation of GRGDS (group PA/PDLLA), and untreated PDLLA control (group PDLLA). After 16 hours of culture, the adhesive cells on scaffolds and the adhesive rate were calculated. After 4 and 8 days of culture, the BMSCs/scaffold composites was observed by scanning electron micorscope (SEM). Results No significant difference in pore size and porosity of PDLLA were observed between before and after ammonia plasma treatments (P gt; 0.05). With increased time of ammonia plasma treatment, the water contact angle of A/PDLLA scaffolds surface was decreased, and the hydrophil icity in the treated scaffolds was improved gradually, showing significant differences when these groups were compared with each other (P lt; 0.001). XPS results indicated that element nitrogen appeared on the surface of PDLLA treated by ammonia plasma. With time passing, the peak N1s became more visible, and the ratio of N/C increased more obviously. AfterPDLLA scaffolds treated for 0, 5, 10, and 20 minutes with ammonia plasma and subsequent conjugation of peptides, the ratio of N/C increased and the peak of S2p appeared on the surface. The confocal laser scanning microscope observation showed that the fluorescence intensity of PA/PDLLA scaffolds increased obviously with treatment time. The amount of peptides conjugated for 10 minutes and 20 minutes PA/PDLLA was detected by HPLC successfully, showing significant differences between 10 minutes and 20 minutes groups (P lt; 0.001). However, the amount of peptides conjugated in un-treated control and 0, 5 minutes PA/PDLLA scaffolds was too small to detect. After 16 hours co-culture of BMSCs/scaffolds, the adhesive cells and the adhesive rates of A/PDLLA and PA/PDLLA scaffolds were higher than those of PDLLA scaffolds, showing significant difference between every 2 groups (P lt; 0.01). Also, SEM observation confirmed that BMSCs proliferation in A/PDLLA and PA/PDLLA groups was more detectable than that in PDLLA group, especially in PA/PDLLA group. Conclusion Ammonia plasma treatment will significantly increase the amount of FITC-GRGDS peptides conjugated to surface of PDLLA via amide l inkage formation. This new type of biomimetic bone has stablized bioactivities and has proved to promote the adhesion and proliferation of BMSCs in PDLLA.
Objective To introduce the research advances of scaffold materials of intervertebral disc tissue engineering. Methods The recent original articlesabout the scaffolds in intervertebral disc tissue engineering were extensively reviewed. Results At present, agarose, alginate gel, collagentype Ⅰ, PLA, PGAare still major scaffold materials for intervertebral disc tissue engineering because of their good biocompatibility. Conclusion It is one of the popular studies on current intervertebral disc tissue engineering to explore the ideal scaffold materials.