OBJECTIVE: To investigate the feasibility to seed vascular endothelial cell(VEC) and vascular smooth muscle cell (VSMC) into tissue engineered blood vessel scaffold material. METHODS: 1. A blood vessel scaffold with a combined polymer was designed, which mainly is composed of rabbit VSMC and collagen with reinforcement by a non-spinning fabric mesh made of polyglycolic acid (PGA). 2. VEC were isolated from rabbit thoracic aorta by enzyme digestion methods and subcultured and purified. Then the cells were seeded into scaffold material. The morphological characteristics of tissue engineered blood vessel was analyzed by scanning electron microscopy. RESULTS: VEC could adhere well to the inner surface of the tissue engineered tubular scaffold material with a tenacity and elasticity. VSMC could sustain bioactivity of cell. CONCLUSION: Non-spinning PGA porous biodegradable materials coated with collagen is benefit for cells to adhere and grow. It will lay a foundation of a laminated structure of tissue engineered blood vessel.
Objective To study the result of using nerve conduit coated with chitin and filled with a guide-fiber to repair peripheral nerve defect. Methods Twenty-four female adult SD rats were made the model of 14 mm-gap on bilateral sciatic nerve under sterile condition. The rats were randomly divided into 4 groups(n=6),group A: polymer polyglycolic-lactic acid(PGLA) nerve conduit coated with chitin and filled with a guide-fiber as experimental group to repair 14 mm gap of rat sciatic nerve；group B: PGLA nerve conduit coated with chitin； group C: PGLA nerve conduit； group D: autograft (control group). The repair result was evaluated by normal observation, EMG testing and S-100 histological immunostaining analysis 4 and 12 weeks after operation.Results Four weeks after the operation，there were new regenerated immature fibers in groups A,B and C, 12 weeks after the operation, the regenerated nerve fibers were seen to have bridged the gap. There were myelinated fibers equably distributed and rarely newgenerated nerve fibers in distal parts of group D. The repair result of PGLA nerve conduit coated with a chitin and filled with guide-fiber was better than that of groups B and C（Plt;0.05）. There was significant difference of nerve fiber diameter，thickness of myelin sheath and fiber density in group D from those in groups A, B and C（Plt;0.05），but there were degenerative changes such as vacuoles insheaths and myelin separation in proximal and few new regenerated nerve fibers in distal parts of group D. Conclusion PGLA nerve conduit coated with chitin and filled with a guide-fiber offers a possible substitute for the repair of peripheral nerve defect.
Objective To study the influence of in vitro force-vascularization on in vivo vascularization of porous polylactic glycolic acid copolymer(PLGA) scaffolds with internal network channels (PPSINC). Methods After the in vitro forcevascula ization of PPSINCs covered with microvessel endothelial cells (MVEC) of mice, they were divided into two groups: the force-vascularization group (group A) and the control group with only PSINCs (group B). All the PPSINCs were planted in the mesentery of 12 mice for 2 and 4 weeks, the PPSINCs were cut out, the vascular ization of PPSINCs was investigated by histology and immunohistochemistry, and the vascularization area of the histologic section of the PPSINCswas measured with the computer-assistant image analysis system. Result After the in vitro forcevascularization of PPSINCs, the MVEC of the mice sticking on the channel wall could be seen. After the scaffold was im planted into the mice for 2 weeks, the vascularization area of the histologic section of PPSINCs (VA) in group A (2 260.91±242.35 μm2) was compared with that in group B (823.64±81.29 μm2)，and the difference was sig nificant in statistics（P＜0.01).The VA for 4 weeks in group A (17 284.36 ±72.67 μm2) was compared with that in group B (17 041.14±81.51 μm2), and the difference was not significant in statistics（P＞0.05）.The area of the actin positivestaining (AA) in the histologi c section of PPSINCs for 2 weeks’ implantation in group A (565.22±60.58 μm2) was compared with that in group B (205.91±16.25 μm2), and the difference was signi ficant in statistics（P＜0.01). After the implantation for 4 weeks, the VA in group A (4 321.09±19.82 μm2) was compared with group B (4 260.28±27.17 μm2), and the difference was not significant in statistics（P＞0.05）. Conclusion The PPSINC is a good simple scaffold model of vasculariazation. The in vitro force-vascularization can increase the in vivo vascularization of PPSINCs in the early stage.
ObjectiveTo evaluate the effect of bone morphogenetic protein 7 (BMP-7)/poly (lactide-co-glycolide) (PLGA) microspheres on in vitro proliferation and chondrogenic differentiation of rabbit bone marrow mesenchymal stem cells (BMSCs).MethodsBMP-7/PLGA microspheres were fabricated by double emulsion-drying in liquid method. After mixing BMP-7/PLGA microspheres with the chondrogenic differentiation medium, the supernatant was collected on the 1st, 3rd, 7th, 14th, and 21st day as the releasing solution. The BMSCs were isolated from the bilateral femurs and tibias of 3-5 days old New Zealand rabbits, and the 3rd generation BMSCs were divided into 2 groups: microspheres group and control group. The BMSCs in microspheres group were cultured by 200 μL BMP-7/PLGA microspheres releasing solution in the process of changing liquid every 2-3 days, while in control group were cultured by chondrogenic medium. The cell proliferation (by MTT assay) and the glycosaminoglycan (GAG) contents (by Alician blue staining) were detected after chondrogenic cultured for 1, 3, 7, 14, and 21 days. The chondrogenic differentiation of BMSCs was observed by safranine O staining, toluidine blue staining, and collagen type Ⅱ immunohistochemistry staining at 21 days.ResultsMTT test showed that BMSCs proliferated rapidly in 2 groups at 1, 3, and 7 days; after 7 days, the proliferation of BMSCs in the control group was slow and the BMSCs in microspheres group continued to proliferate rapidly. There was no significant difference of the absorbance (A) value at 1, 3, and 7 days between 2 groups (P>0.05), but theA value at 14 and 21 days in microspheres group was significantly higher than that in control group (P<0.05). Compared with control group at 21 days, in microsphere group, almost all nuclei were dyed bright red by safranine O staining, almost all the nuclei appeared metachromatic purple red by toluidine blue staining, and the most nuclei were yellow or brown by immunohistochemical staining of collagen type Ⅱ. Alcian blue staining showed that the content of GAG in 2 groups increased continuously at different time points; after 7 days, the increasing trend of the control group was slow and the microspheres group continued hypersecretion. There was no significant difference of the GAG content at 1, 3, and 7 days between 2 groups (P>0.05), but the GAG content at 14 and 21 days in microspheres group was significantly higher than that in control group (P<0.05).ConclusionBMP-7/PLGA microspheres prepared by double emulsion-drying in liquid method in vitro can promote proliferation and chondrogenic differentiation of rabbit BMSCs.
OBJECTIVE: To explore the distribution and effect of endogenic bone morphogenetic protein (BMP) in repairing rabbit skull with tissue engineered bone. METHODS: The autologous osteoblast-like cells were instantly implanted onto polyglycolic acid (PGA) matrix coated with collagen. The rabbit skull defect models were established by resection of bilateral 1.5 cm x 1.0 cm full-thickness parietal bone in 18 New Zealand rabbits, which were randomly divided into two groups. In one group, the composite of osteoblast- like cells and PGA matrix were grafted into the defect on one side of the skull as experimental group I, leaving the same defect area on the other side as control group without any graft implanted. In the other group, simply PGA was done in the same way as experimental group II. The tissue samples were harvested at 3, 8 and 14 days postoperatively and examined by histological and immunohistochemistry methods. The concentrations of BMP in different regions of the samples were measured using computer image analysis system. RESULTS: After 3 days of operation, the BMP positive cells were found in the matrix of experimental group I. At 8 days postoperatively, the formation of new bone on experimental group I was prior to that of experimental group II and control group. On the 14th day, bone trabecula was formed on the experimental group I, but there was only fibrous tissue on control group. The concentration of BMP on the experimental group I and II were higher than that of corresponding region on control side. CONCLUSION: The osteoblast-like cells instantly implanted onto PGA matrix can synthesize and secrete BMP. It may be one of the reasons of tissue engineered bone inducing new bone regeneration that localizing endogenic BMP in bone defect area, increasing the concentration of endogenic BMP and improving its distribution by tissue engineering technique.
OBJECTIVE: To explore the feasibility of reconstructing tissue engineered vessel in vitro. METHODS: Bovine endothelial cells were isolated from calf thoracic aorta by enzyme digestion methods and subcultured and purified. The endothelial cells of the 3rd to 7th passages were seeded into the inner surface of tubular scaffold material by polyglycolic acid(PGA) coated with cross-linked collagen, and cultured in vitro for 10 days using dynamic rotation culture technique. Scanning electron microscopy was used to analyse the morphological characteristics, and prostacyclin released by endothelial cells was measured by radioimmunoassay of 6-keto-prostaglandin F1 alpha. RESULTS: The VIII factor staining of cultured endothelial cells was positive. The endothelial cells adhered well on the inner surface of tubular scaffold material with confluent monolayer covering(91.2 +/- 1.5)%. The endothelialized model released prostacyclin at a rate of (4.6 +/- 0.5) micrograms/cm2.min. There was significant difference to control group (P lt; 0.05). CONCLUSION: The PGA coating with collagen is an ideal scaffold for endothelial cells, the coverage rate is increased through dynamic rotation culture technique. It will lay a good foundation for architecture of a laminated structure of tissue engineered vessel.
Objective Choose polylactide-co-glycolide/hydroxyapatite (PLGA/HA) and porous phosphate calcium (PPC) as the object that we will study, compare their degradabality and choose one as a suitable scaffold for rib reconstruction. Methods All the experiments were divided into PLGA/HA group and CPC group. Degradabality experiment in exvivo: put the two scaffold which have the same size into 0.9% NaCl, keep sterile, then put the container into warm cage，get out and weigh them in 2, 4, 8, 12 and 24 weeks, compare the different speed of the two scaffold. Degradability experiment in vivo: put the two scaffold which have the same size under the skin of the rabbit, and weigh them in 2, 4, 8, 12 and 24 weeks, the tissue around the scaffold was examinzed by HE and the scaffold was examined by electron scanning microscope. Results Micro-CT and Scanning electron microscopy shows that CPC group had better structure （1101.2228±0.6184 mg/ccm vs. 1072.5523±0.7442 mg/ccm）and porosity（70.26％±0.45％ vs.72.82％±0.51％）than PLGA/HA group; The result of degradabality experiment in vitro shows that the speed of the two scaffolds was slow. It is at 24 weeks that the degradability is obvious,and the PLGA/HA group degraded a lot which was 60%. The result of degradabality experiment in vivo shows that the speed of degradabality of PLGA/HA group was faster than that is in the 0.9% Nacl, also was faster than that of CPC group which was 96%.The reponse of tissue around the PLGA/HA was more sever than that of CPC group which is in favour of the growth of cells. Conclusion As for the reconstruction of large defect of rib, CPC is more suitable than PLGA/HA.
Objective To observe the release pattern of the microcysts and the effect of ectopic osteogenesis of combined micromorselized bone by optimized preparation of microcysts. Methods Optimized poly-DLlactide-co-glycolide (PLGA) microcysts manufacturing method was performed with the orthogonal design, and the accumulated release amount of microcysts was calculated at 2 h, 4 h, 8 h, 12 h, 24 h, 36 h, 48 h, 60 h, 72 h, 84 h, 96 h, 120 h, 144 h, 168 h, 192 h, 216 h, 240 h and 264 h. Twentyfour Wistar rats were divided into 4 groups (n=6) and 1 cm length incision was cut in their bilateral thighs skin, forming 48 gluteus maximus muscle sackmodels. In group A,collagen was implanted to bilateral muscle sacks respectively. In group B, collagen and autologous morselized bone were implanted to bilateral muscle sacks. Ingroup C, collagen and rhBMP-2/PLGA delayed release microcysts were implanted to bilateralmuscle sacks respectively. In group D, collagen and morselized bone/rhBMP-2/PLGA delayed release microcysts were implanted to bilateral muscle sacks. Gross and histologic observations were made at 3, 4 and 5 weeks postoperatively.Results Every optimized variance had an effect on particle diameter of microcyst and its encapsulating rate. The microcyst’s surface was smooth and had a fine spheroplast, which released slowly within 11 days in vitro. In thethird week postoperatively, the graft in group A could not be touched, while the graft in all other 3 groups was still found. After 3 weeks, collagen was absorbed completely in group A, the residual collagen could be seen in groups B, C andD. After 4 weeks, collagen could be seen in group A; micromorselized bone continued to be absorbed and became smaller in group B; microsphere became smaller, osteoblasts increased in group C; micromorselized bone and microsphere continuedto be absorbed, oteoblasts and chondroblasts increased. After 5 weeks, implantsbecame small, microsphere was absorbed, osteoblasts and chondroblasts became more in groups B, C and D. Microcysts presented with white granuloshape and were packaged in tissue pieces. Histologic observation showed that the PLGA microcysts in 3 weeks and 4 weeks could be absorbed gradually as the time in vivo, if combining with morselzed bone they could produce abundant induced osteoblasts and chondroblasts. Conclusion Optimizing the preparation technology of microcysts has delayed their release during a long period in vitro. Autologous micromorselized bone can be ectopicly induced to produce large amount of osteoblasts in gluteus maximus muscle sack, where PLGA microcysts can combine organically and bring about the bone formation with less amount of growth factors.
Objective To evaluate the feasibility of reconstructionof urothelium tissue in vivo using tissue-engineering technique. Methods The urothelium cells were obtained from young rabbit, bladder by mechanical and enzyme digested methods. After expanded in vitro, the 4th to 5th generation urothelium cells were seeded onto the surface of 8 Polylatical／glycolic acid copolymer polymer，the polymer matrix without seeding cells served as control group. A total of 8 cell-polymer scaffolds and 4 simply scaffolds were separately implanted into subcutaneous pockets of athymic mice. Theexperiment groups included cell-polymer scaffolds 4 weeks and cell-polymer scaffolds 8 weeks. The control group included simply scaffold 4 weeks and simply scaffold 8 weeks.After 4 and 8 weeks, the specimens were obtained and examined by gross inspection, histologically and immunohistochemically. Results The results of HE and Masson staining showed that the polymer were covered by urothelium cells layers and cells layers increased markly in experimental group. Immuocytochemical studies revealed that the cells were stained positively for anti-cytokeratins (AE1/AE3) in experimental group. Fiber tissue deposition were found on the surface of polymers in control group by HE and Masson staining. Immunocytochemical staining of implants showed the negative result for cytokeratins in control group. Conclusion It is feasibility that reconstruction of urothelium tissue using tissue-engineering -technique,whichprovides basic understandings for further development of the bladder and ureteral tissue engineered research.
ObjectiveTo explore the biocompatibility of the poly-lactide-co-glycolide (PLGA)/collagen type I scaffold with rat vaginal epithelial cells, and the feasibility of using PLGA/collagen type I as scaffold to reconstruct vagina by the tissue engineering. MethodsPLGA/collagen type I scaffold was prepared with PLGA covered polylysine and collagen type I. The vaginal epithelial cells of Sprague Dawley rat of 10-12 weeks old were cultured by enzyme digestion method. The vaginal epithelial cells of passage 2 were cultured in the leaching liquor of scaffold for 48 hours to detect its cytotoxicity by MTT. The vaginal epithelial cells were inoculated on the PLGA/collagen type I scaffold (experimental group) and PLGA scaffold (control group) to calculate the cell adhesion rate. Epithelial cells-scaffold complexes were implanted subcutaneously on the rat back. At 2, 4, and 8 weeks after implantation, the epithelial cells-scaffold complexes were harvested to observe the cell growth by HE staining and immunohistochemical analysis. The epithelial cells-scaffold complexes were transplanted to reconstruct vagina in 6 rats with vaginal defect. After 3 and 6 months, the vaginal length was measured and the appearance was observed. The neovagina tissues were harvested for histological evaluation after 6 months. ResultsThe epithelial cells grew and proliferated well in the leaching liquor of PLGA/collagen type I scaffold, and the cytotoxicity was at grade 1. The cell adhesion rate on the PLGA/collagen type I scaffold was 71.8%±9.2%, which significantly higher than that on the PLGA scaffold (63.4%±5.7%) (t=2.195, P=0.005). The epithelial cells could grow and adhere to the PLGA/collagen type I scaffolds. At 2 weeks after implanted subcutaneously, the epithelial cells grew and proliferated in the pores of scaffolds, and the fibroblasts were observed. At 4 weeks, 1-3 layers epithelium formed on the surface of scaffold. At 8 weeks, the epithelial cells increased and arranged regularly, which formed the membrane-like layer on the scaffold. The keratin expression of the epithelium was positive. At 3 months after transplantation in situ, the vaginal mucosa showed pink and lustrous epithelialization, and the majority of scaffold degraded. After 6 months, the neovagina length was 1.2 cm, without obvious stenosis; the vaginal mucosa had similar appearance and epithelial layer to normal vagina, but it had less duplicature; there were nail-like processes in the basal layer, but the number was less than that of normal vagina. The immunohistochemistry staining for keratin was positive. ConclusionThe PLGA/collagen type I scaffolds have good cytocompatibility with the epithelial cells, and can be used as the biodegradable polymer scaffold of the vaginal tissue engineering.