目的:观察在青少年脊柱侧凸患者中术前实施综合性呼吸操锻炼的临床效果方法:选取46例伴有不同程度肺功能障碍的青少年脊柱侧弯患者作为研究对象,对其自入院后第一天即开始实施综合性呼吸操锻炼,观察术前肺功能的变化情况及术后肺部并发症的发生情况。结果:锻炼后患者肺活量(VC)、肺容量(TLC)、用力肺活量(FVC)、最大通气量(MVV),等肺功能指标较锻炼前有明显改善,差异具有统计学意义(Plt;0.05);术后血氧饱和度gt;95%;无肺部并发症发生。结论:入院后即进行综合性呼吸操锻炼能在近期有效改善患者肺功能,提高患者对脊柱矫形手术的耐受力,对预防和减少术后肺部感染以及呼吸功能不全的发生有积极作用。
ObjectivesTo systematically review the proportion of Tregs in peripheral blood of patients with ankylosing spondylitis (AS) and its relationship with Treg's diffrent phenotypes.MethodsPubMed, EMbase, The Cochrane Library, CNKI, WanFang Data and VIP databases were electronically searched to collect case-control studies on peripheral Tregs of AS patients from inception to November 31st, 2018. Two reviewers independently screened literature, extracted data and assessed the risk of bias of included studies. Then, meta-analysis was performed by using Stata 12.0 software.ResultsA total of 61 case-control studies involving 2 466 AS patients and 1 879 controls were included. The results of meta-analysis showed that: the proportion of peripheral Tregs of patients with AS was significantly lower than that of the normal control (SMD=−0.905, 95%CI −1.294 to −0.517, P<0.000 1), and the proportion of Tregs in the disease-active group was significantly lower than that in disease-inactive group (SMD=−0.928, 95%CI −1.431 to −0.425, P<0.000 1). The proportion of CD4+CD25+FOXP3+Tregs and CD4+CD25+CD127low/−Tregs were lower in AS patients than that in control subjects (SMD=−2.547, 95%CI −3.521 to −1.573, P<0.000 1; SMD=−0.709, 95% CI −1.056 to −0.362, P<0.000 1). The proportion of Tregs defined by CD4+CD25low/−FOXP3+ was higher in AS patients (SMD=0.683, 95%CI 0.161 to 1.206, P=0.01). There was no significant difference betweew other phenotypes of Tregs groups.roups.ConclusionsThe reduction of Tregs may be one of the important reasons for the occurrence and development of AS, which may provide a new approach for the diagnosis and treatment of AS.
ObjectiveTo explore the effectiveness of a new point contact pedicle navigation template (referred to as “new navigation template” for simplicity) in assisting screw implantation in scoliosis correction surgery. MethodsTwenty-five patients with scoliosis, who met the selection criteria between February 2020 and February 2023, were selected as the trial group. During the scoliosis correction surgery, the three-dimensional printed new navigation template was used to assist in screw implantation. Fifty patients who had undergone screw implantation with traditional free-hand implantation technique between February 2019 and February 2023 were matched according to the inclusion and exclusion criteria as the control group. There was no significant difference between the two groups (P>0.05) in terms of gender, age, disease duration, Cobb angle on the coronal plane of the main curve, Cobb angle at the Bending position of the main curve, the position of the apical vertebrae of the main curve, and the number of vertebrae with the pedicle diameter lower than 50%/75% of the national average, and the number of patients whose apical vertebrae rotation exceeded 40°. The number of fused vertebrae, the number of pedicle screws, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were compared between the two groups. The occurrence of implant complications was observed. Based on the X-ray films at 2 weeks after operation, the pedicle screw grading was recorded, the accuracy of the implant and the main curvature correction rate were calculated. ResultsBoth groups successfully completed the surgeries. Among them, the trial group implanted 267 screws and fused 177 vertebrae; the control group implanted 523 screws and fused 358 vertebrae. There was no significant difference between the two groups (P>0.05) in terms of the number of fused vertebrae, the number of pedicle screws, the pedicle screw grading and accuracy, and the main curvature correction rate. However, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were significantly lower in trial group than in control group (P<0.05). There was no complications related to screws implantation during or after operation in the two groups. ConclusionThe new navigation template is suitable for all kinds of deformed vertebral lamina and articular process, which not only improves the accuracy of screw implantation, but also reduces the difficulty of operation, shortens the operation time, and reduces intraoperative bleeding.
Objective To assess the outcomes of pedicle subtration osteotomy and short-segment pedicle screw internal fixation in kyphosisdeformity. Methods From June 2001 to November 2003, 16 cases of kyphosis deformity were treated with pedicle subtration osteotomy and short-segment pedicle screw internal fixation, including 11 males and 5 females and aging 24-51 years. The kyphosis deformity was caused by ankylosing spondylitis in 12 cases, old lumbothoracic fracturedislocation in 2 cases, and vertebral dysplasia in 2 cases. The disease course was 7-25 years with an average of 12.8years. The whole spine radiographs were taken pre-and postoperatively. The sagittal balance was assessed by measuring thoracic kyphosis angle, lumbar lordosis angle, acrohorizontal angle and distance between posterosuperior point of S1and the vertical line. The clinical outcomes were assessed by Bridwell-Dewald scale for spinal disorders. Results The mean follow-up period was25.6 months. The mean bleeding was 1 100 ml. Satisfactory bone graft healing was achieved at final follow-up. Complications were paralytic intestinal obstruction in 1 case, dura laceration in 1 case, and temporary lower limb paralysis in 2 cases. Final follow-up radiograph showed an increase in lumbar lordosis angle from 9.6±16.4° to 42.6±14.3°(P＜0.05), whereas thoracic kyphosis angle remained relative stable. The distance between posterosuperior point of S1 and the vertical line was decreased from 97.5±45.6 mm to 10.7±9.6 mm(P＜0.05). Satisfactory clinical outcome was achieved by evaluating the changes of pain, social and working status. Conclusion Pedicle subtraction osteotomy and short-segment pedicle screw internal fixation is effective for correction of kyphosis deformity.
Objective To study the imaging features of the hip joint by measuring the imaging parameters of spine, pelvis, and hip joint before and after total hip arthroplasty (THA) in patients with ankylosing spondylitis (AS) undergoing THA so as to provide reference for selection of operation methods and prosthesis. Methods Between January and July 2015, 38 patients (56 hips) with AS underwent primary THA as AS group, and 36 patients (45 hips) with osteonecrosis of the femoral head underwent THA as control group. There was no significant difference in side (χ2=1.14,P=0.95). The acetabular abduction angle (ABA), acetabular anteversion angle (AVA), center collum diaphyseal (CCD), offset, height from rotation center to lesser trochanter (HRCLT), femoral intertrochanteric distance (FID) were measured by CT three-dimensional morphology. The canal flare index (CFI), cortical thickness index (CTI), pelvic incidence (PI), sacral slope (SS), and pelvic tilt (PT) were measured by X-ray film before operation. The AVA, ABA, and the filling ratio were measured on the postoperative X-ray film. Results There was no significant difference in preoperative AVA and ABA and postoperative ABA between 2 groups (P>0.05), but significant difference was found in postoperative AVA (t=6.71,P=0.00). The mean PI, SS, and PT in AS group were 48.37° (range, 41-58°), 5.64°(range, 2-11°), and 12.85° (range, 5-26°), respectively. There was significant difference in CCD, CFI, and CTI between 2 groups (t=3.63,P=0.04;t=5.12,P=0.02;t=3.91,P=0.04), but offset, HRCLT, and FID all showed no significant difference (t=0.41,P=0.36;t=0.33,P=0.56;t=0.59,P=0.12). On the basis of the Noble classification, medullary cavity of the femur was rated as chimney type, ordinary type, and champagne flute type in 32, 18, and 6 hips of AS group, and in 4, 28, and 13 hips of control group respectively. Filling ratio of distal segment in AS group was significantly lower than that in control group (t=5.64,P=0.02), but there was no significant difference in the filling ratio of middle and proximal segments between 2 groups (t=0.29,P=0.61;t=0.55,P=0.13). Conclusion Compared with patients having osteonecrosis of the femeral head, there is no significant difference in preoperative AVA and ABA, but postoperative AVA significantly increase in patients with AS. Because AS patients have mainly chimney type medullary cavity of the femur, the filling ratio of middle and distal segment is lower when tapered stems are used, and the filling ratio of anatomic stems is higher.
Objective To explore the feasibilities, methods, outcomes and indications of atlas pedicle screw system fixation and fusion for the treatment of upper cervical diseases. Methods From October 2004 to January 2006, 17 patients with upper cervical diseases were treated with atlas pedicle screw system fixation and fusion. There were 13 males and 4 females, ageing 19 to 52 years. Of 17 cases, there were 14 cases of atlantoaxial dislocation(including 3 cases of congenital odontoid disconnection，4 cases of old odontoid fracture，2 cases of new odontoid fracture(typeⅡC), 3 cases of rupture of the transverse ligament, and 2 cases of atlas fracture； 2 cases of tumor of C2; 1case of giant neurilemoma of C2,3 with instability after the resection oftumors. JOA score before operation was 8.3±3.0. Results The mean operative time and bleeding amount were 2.7 hours (2.1-3.4 hours) and 490 ml (300-750 ml) respectively. No injuries to the vertebral artery and spinal cord were observed. The medial-superior cortex of lateral mass was penetrated by 1 C1 screw approximately 3 mmwithout affecting occipito-atlantal motions. All patients were followed up 3-18 months. The clinical symptoms were improved in some extents and the screws were verified to be in a proper position, no breakage or loosening of screw and rob occurred. All patients achieved a solid bone fusion after 3-6 months. JOA score 3 months after operation was14.6±2.2. JOA improvement rates were 73%-91%(mean 82%). Conclusion The atlas pedicle screw system fixation and fusion is feasible for the treatment of upper cervical diseases and has betteroutcomes, wider indications if conducted properly.
Objective To study the properties of the xenogeneic deproteinized cancellous bone used as a scaffold in the bone tissue engineering andits application to the spinal fusion of the lumbar intertransverse process in agoat. Methods The deproteinized bone was derived from an adult pig’s femoral cancellous bone through the physical and chemical treatments. Its morphological features, constituting components, and biomechanical properties were examined by the scanning electron microscopy, X-ray diffraction analysis, and mechanical experimental instrument. The cell-material complex was observed under the inverted phase contrast microscope to evaluate the adhesion and the growth of the osteoblasts. The experimental model of the spinal fusion of the lumbar intertransverse process was produced in 12 male goats aged 6-8 months, which were divided into two groups. In Group A, the tissue engineered bone constructed by thexenogeneic deproteinized cancellous bone, the recombinant human bone morphogenetic protein 2, and the mesenchymal stem cells was used for the spinal fusion; however, in Group B the autoilium was used. The samples were harvested at 4, 8 and 12 weeks postoperatively, and a series of examinations were performed, including the radiography and the histomorphological assay. Results The deproteinized cancellous bone had a natural pore network system, with an aperture ranging in size from 200 to 500 μm, containing a main organic material ofcollagen and the inorganic material of hydroxyapatite. So, the deproteinized cancellous bone had a good mechanical strength and a good histocompatibility. In Group A, the X-ray examination at different timepoints postoperatively showed that at 4 weeks,the bridging areas of all the fusion sites were not clear, especially on the internal side; at 8 weeks, the upper and lower bridged parts had a narrowed gap, with formation of much continuous bony callus; at 12 weeks, a complete fusion occurred. In the early stage, the material density was slightly lowerin Group A than in Group B, but at 12 weeks the density was almost the same in both the groups. Histological examination in the transplant area showed that at 4 weeks in Group A there was a new bone formation in a multipoint way; at 8 weeks, a “sandwichshaped” new bone wascrossed with the transplanting materials; and at 12 weeks, a medullary cavity was remodeled and a new cancellous bone was formed. The osteogenic process of thetissue engineered bone constructed by the xenogeneic deproteinized cancellous bone scaffold was almost the same as the autoilium osteogenesis. Conclusion The xenogeneic deproteinized cancellous bone is a good material in the bone tissue engineering, which can be used as an osteogenesis scaffold andprovide a stable environment for revascularization and osteoblastic differentiation.
To investigate the effects of postoperative fusion implantation on the mesoscopic biomechanical properties of vertebrae and bone tissue osteogenesis in idiopathic scoliosis, a macroscopic finite element model of the postoperative fusion device was developed, and a mesoscopic model of the bone unit was developed using the Saint Venant sub-model approach. To simulate human physiological conditions, the differences in biomechanical properties between macroscopic cortical bone and mesoscopic bone units under the same boundary conditions were studied, and the effects of fusion implantation on bone tissue growth at the mesoscopic scale were analyzed. The results showed that the stresses in the mesoscopic structure of the lumbar spine increased compared to the macroscopic structure, and the mesoscopic stress in this case is 2.606 to 5.958 times of the macroscopic stress; the stresses in the upper bone unit of the fusion device were greater than those in the lower part; the average stresses in the upper vertebral body end surfaces were ranked in the order of right, left, posterior and anterior; the stresses in the lower vertebral body were ranked in the order of left, posterior, right and anterior; and rotation was the condition with the greatest stress value in the bone unit. It is hypothesized that bone tissue osteogenesis is better on the upper face of the fusion than on the lower face, and that bone tissue growth rate on the upper face is in the order of right, left, posterior, and anterior; while on the lower face, it is in the order of left, posterior, right, and anterior; and that patients’ constant rotational movements after surgery is conducive to bone growth. The results of the study may provide a theoretical basis for the design of surgical protocols and optimization of fusion devices for idiopathic scoliosis.
Objective To review current status of surgical treatment for angular kyphosis in spinal tuberculosis and provide reference for clinical treatment. Methods The literature on the surgical treatment for angular kyphosis of spinal tuberculosis in recent years was extensively reviewed and summarized from the aspects of surgical indications, surgical contraindications, surgical approach, selection of osteotomy, and perioperative management. Results Angular kyphosis of spine is a common complication in patients with spinal tuberculosis. If kyphosis progresses gradually, it is easy to cause neurological damage, deterioration, and delayed paralysis, which requires surgical intervention. At present, surgical approaches for angular kyphosis of the spine include anterior approach, posterior approach, and combined anterior and posterior approaches. Anterior approach can be performed for patients with severe spinal cord compression and small kyphotic Cobb angle. Posterior approach can be used for patients with large kyphotic Cobb angle but not serious neurological impairment. A combined anterior and posterior approaches is an option for spinal canal decompression and orthosis. Osteotomy for kyphotic deformity include Smith-Peterson osteotomy (SPO), pedicle subtraction osteotomy (PSO), vertebral column resection(VCR), vertebral column decancellation (VCD), posterior vertebral column resection (PVCR), deformed complex vertebral osteotomy (DCVO), and Y-shaped osteotomy. SPO and PSO are osteotomy methods with relatively low surgical difficulty and low surgical risks, and can provide 15°-30° angular kyphosis correction effect. VCR or PVCR is a representative method of osteotomy and correction. The kyphosis correction can reach 50° and is suitable for patients with severe angular kyphosis. VCD, DCVO, and Y-shaped osteotomy are emerging surgical techniques in recent years. Compared with VCR, the surgical risks are lower and the treatment effects also improve to varying degrees. Postoperative recovery is also a very important part of the perioperative period and should be taken seriously. Conclusion There is no consensus on the choice of surgical treatment for angular kyphosis in spinal tuberculosis. Osteotomy surgery are invasive, which is a problem that colleagues have always been concerned about. It is best to choose a surgical method with less trauma while ensuring the effectiveness.