ObjectiveTo review the properties of bio-derived hydrogels and their application and research progress in tissue engineering. MethodsThe literature concerning the biol-derived hydrogels was extensively reviewed and analyzed. ResultsBio-derived hydrogels can be divided into single-component hydrogels (collagen,hyaluronic acid,chitosan,alginate,silk fibroin,etc.) and multi-component hydrogels[Matrigel,the extract of extracellular matrix (ECM),and decellularized ECM].They have favorable biocompatibility and bioactivity because they are mostly extracted from the ECM of biological tissue.Among them,hydrogels derived from decellularized ECM,whose composition and structure are more in line with the requirements of bionics,have incomparable advantages and prospects.This kind of scaffold is the closest to the natural environment of the cell growth. ConclusionBio-derived hydrogels have been widely used in tissue engineering research.Although there still exist many problems,such as the poor mechanical properties,rapid degradation,the immunogenicity or safety,vascularization,sterilization methods,and so on,with the deep-going study of optimization mechanism,desirable bio-derived hydrogels could be obtained,and thus be applied to clinical application.
Objective To review the decellularized methods for obtaining extracellular matrix (ECM) and the applications of decellularized ECM scaffold in tissue engineering. Methods Recent and related literature was extensively and comprehensively reviewed. The decellularized methods were summarized and classified. The effects of different sterilization methods on decellularized scaffolds were analyzed; the evaluation criterion of extent of decellularization was put forward; and the application of decellularized ECM scaffold in different tissues and organs engineering field was summarized. Results The decellularized methods mainly include physical methods, chemical methods, and biological methods, and different decellularization methods have different effects on the extent of cell removal and ECM composition and structure. Therefore, the best decellularization method will be chosen according to the characteristics of the tissues and decellularization methods to achieve the ideal result. Conclusion It is very important to choose the appropriate decellularized method for preparing the biological materials desired by tissue engineering. The biological scaffolds prepared by decellularized methods will play an important role in tissue engineering and regenerative medicine.
【Abstract】 Objective To design a novel small-cal iber vascular graft using a decellularized allogeneic vascularscaffold pre-loaded with bFGF. Methods The decellularized canine common carotid were obtained by a detergent-enzymatic procedure, then the scaffolds were covalently l inked with heparin and pre-loaded with bFGF, the amount of binding bFGF and releasing curve were assayed by ELISA. Canine BMSCs expanded in vitro were seed on the scaffolds to observe the effects of binding bFGF on prol iferation. Both bFGF pre-loaded and non-pre-loaded decellularized grafts were implanted in canines as carotid artery interposition for 8 weeks, the patency was examined by digital subtraction angiography and histological method. Results Histology and electron microscopic examination of the decellularized scaffolds showed that cellular components were removed completely and that the extracellular matrix structure remained intact. The amount of binding bFGF positively related to the concentration of bFGF. There was a significant difference in the amount of binding bFGF between two different scaffoldsthroughout all bFGF concentrations(P lt; 0.05), and up to 100 ng/mL, the local and sustained release of bFGF from the heparin treated scaffolds were assayed up to 20 days. Additionally, MTT test showed the bFGF-preloaded scaffolds significantly enhanced the prol iferation of seeded BMSCs in vitro compared with non-bFGF-preloaded scaffolds at 3 days after seeding and thereafter(P lt; 0.01). Furthermore, in vivo canine experiments revealed that all 8 bFGF-pre-loaded scaffolds remained patent after 8 weeks of implantation, and host cell l ined the lumen and populated the wall. Only 1 non-bFGF-pre-loaded scaffold was patent, and the other 7 grafts were occluded because of thrombsus formation. Conclusion This study provides a new strategy to develop a small diameter vascular graft with excellent biocompatibil ity and high patency rate.
Objective To investigate a method for preparing decellularized rat heart scaffold, and to detect and evaluate the decellularized scaffold. Methods The decellularized rat heart scaffold was prepared by retrograde perfusion with a combination of enzymatic and Triton X-100 detergent methods to remove the populations of resident cells, and then the decellularized scaffold was observed by gross, toluidine blue staining, HE staining, scanning electron microcope (SEM), Alcian blue staining, and immunohistochemisty staining to evaluate the structure and essential component of extracellular maxtix (ECM) in the scaffold. Results Tissue engineered scaffold based on decellularized whole heart ECM was successfully prepared, which maintained not only the gross morphology of the heart, but also the intact vascular structure and ultrastructural conformation that certified by toluidine blue staining, HE staining, and SEM analyses. Alcian blue staining and immunohistochemisty staining showed that the essential components of ECM, such as collagen type I, glycosaminoglycan, fibronectin, and Laminin were remained in decellularized whole heart matrix. Conclusion The decellularized whole heart ECM prepared by method mentioned can maintain the intact structure of rat heart and basic compositions of extracellular matrices, so it could be suitable for further studies of tissue engineered scaffolds for whole heart reconstruction.
ObjectiveTo prepare the aortic extracellular matrix (ECM) scaffold by using different methods to decellularize porcine ascending aorta and to comprehensively compare the efficiency of decellularization and the damage of ECM, evaluation of biomechanical property and biocompatibil ity. MethodsThirty specimens of fresh porcine ascending aorta were randomly divided into 6 groups (n=5). The porcine ascending aorta was decellularized by 5 different protocols in groups A-E: 0.1% trypsin/0.02% ethylenediamine tetraacetic acid (EDTA)/PBS was used in group A, 1%Triton X-100/0.02% EDTA/ distilled water in group B, 1% sodium deoxycholic acid/distilled water in group C, 0.5% sodium deoxycholic acid/0.5% sodium dodecyl sulfate/distilled water in group D, and 1% deoxycholic acid/distilled water in group E; and the porcine ascending aorta was not decellularized as control in group F. The ascending aorta scaffolds were investigated by gross examination, HE staining, DNA quantitative analysis, immunohistochemistry, and scanning electron microscopy were used to observe the efficiency of decellularization, microstructure of the ECM, the damage of collagen type Ⅰ and elastin, the structure of intimal surface, and biomechanical property. The 90 Sprague Dawley rats were randomly divided into 6 groups (n=15). Each scaffold was implanted in the abdominal muscles of rats respectively to evaluate the immunogenicity and biocompatibil ity. ResultsHE staining and quantitative analysis of DNA showed that the cells were completely removed only in groups A and D. The expression of collagen type Ⅰ in group A was significantly lower than that in the other 5 groups (P < 0.05), and serious damage of the basement membrane and decreased beomechanical property were observed. The maximum stress and tensile strength in group A was significantly lower than those in the other groups (P < 0.05), and elongation at break was significantly higher than that in the other groups (P < 0.05). The destruction of collagen type Ⅰ was significant (P < 0.05) in group D, but the basement membrane was integrity, the biomechanical properties were close to the natural blood vessels (group F) (P > 0.05). Implantation results showed that the scaffold of group D had superior immunogenicity and histocompatibility to the scaffold of the other groups. The inflammatory reaction was gentle and the number of the inflammatory cell infiltration was lower in group D than in other groups (P < 0.05). ConclusionIt is concludes that 0.5% sodium deoxycholic acid/0.5% sodium dodecyl sulfate/distilled water is more suitable for the decellularization of porcine aorta, by which the acquired ECM scaffold has the potential for constructing tissue engineered vessel.
Objective To study and test novel hybrid valves in vitro and in vivo, and provide basis for clinical use in future. Methods The hybrid valves were fabricated from decellularized porcine aortic valves coated with poly (3-hydroxybutyrate-co-3hydroxyhexanoate, PHBHHx).（1）In the mechanical test in vitro, the uniaxial tensile biomechanics test of the fresh (n=12), uncoated (n=12) and hybrid valve leaflets (n=12) were investigated. (2）In study in vivo, hybrid valves(n=5) implanted in pulmonary position in sheep without cardiopulmonary bypass. Uncoated grafts (n=5) used as control. The specimens of the hybrid or uncoated valve in sheep were explanted and examined by scanning electron microscopy, histology, calcium content and immunofluorescence staining 18 weeks after surgery. Results The mechanical test in vitro revealed that coating with PHBHHx increased maximal tensile strength of hybrid valves compared with the fresh and uncoated state (P＜0.05). The results in vivo indicated the hybrid valves maintained original shape and softness. Immunofluorescence staining for CD31 confirmed that the surface of hybrid valve was covered by confluent CD31+ cells.The interstitium of hybrid valve indicated that smooth muscle actin (SMA)+ cells population were similar to native valvular tissue. The calcium content of hybrid valve was significantly lower than that of uncoated valve leaflets (P＜0.05). Conclusion Decellularized porcine aortic valves coated with PHBHHx have good biological and biomechanical characteristics. The hybrid valve may provide superior valve replacement with current techniques.
ObjectiveTo study the feasibility of human adipose-derived stem cells (hADSCs) combined with small intestinal submucosa powder (SISP)/chitosan chloride (CSCl)-β-glycerol phosphate disodium (GP)-hydroxyethyl cellulose (HEC) for adipose tissue engineering. MethodshADSCs were isolated from human breast fat with collagenase type I digestion, and the third passage hADSCs were mixed with SISP/CSCl-GP-HEC at a density of 1×106 cells/mL. Twenty-four healthy female nude mice of 5 weeks old were randomly divided into experimental group (n=12) and control group (n=12), and the mice were subcutaneously injected with 1 mL hADSCs+SISP/CSCl-GP-HEC or SISP/CSCl-GP-HEC respectively at the neck. The degradation rate was evaluated by implant volume measurement at 0, 1, 2, 4, and 8 weeks. Three mice were euthanized at 1, 2, 4, and 8 weeks respectively for general, histological, and immunohistochemical observations. The ability of adipogenesis (Oil O staining), angiopoiesis (CD31), and localized the hADSCs (immunostaining for human Vimentin) were identified. ResultsThe volume of implants of both groups decreased with time, but it was greater in experimental group than the control group, showing significant difference at 8 weeks (t=3.348, P=0.029). The general observation showed that the border of implants was clear with no adhesion at each time point;fat-liked new tissues were observed with capillaries on the surface at 8 weeks in 2 groups. The histological examinations showed that the structure of implants got compact gradually after injection, and SISP gradually degraded with slower degradation speed in experimental group;adipose tissue began to form, and some mature adipose tissue was observed at 8 weeks in the experimental group. The Oil O staining positive area of experimental group was greater than that of the control group at each time point, showing significant difference at 8 weeks (t=3.411, P=0.027). Immunohistochemical staining for Vemintin showed that hADSCs could survive at each time point in the experimental group;angiogenesis was most remarkable at 2 weeks, showing no significant differences in CD31 possitive area between 2 groups (P>0.05), but angiogenesis was more homogeneous in experimental group. ConclusionSISP/CSCl-GP-HEC can use as scaffolds for hADSCs to reconstruct tissue engineered adipose.
Abstract: Objective To observe the physical characteristics of decellularized porcine pulmonary valved conduits crosslinked by carbodiimide (EDC). Methods [WTBZ]Twenty porcine pulmonary valved arteries were mobilized on relative asepsis condition. They were cut longitudinally into three samples at the junction position of pulmonary valve (every sample was comprised of a part of the pulmonary conduit wall and the corresponding valve). The samples were randomly divided into three groups by lotdrawing method. Group A was the control group which was made up of the fresh porcine arterial valved conduit samples without any other treatments. Group B was comprised of porcine pulmonary samples decellularized by trypsindetergent digestion. Group Cincluded the decellularized porcine pulmonary samples crosslinked by EDC. We observed the water content, thickness, tensile strength, and shrinkage temperature of all the samples, based on which the physical characeteristics of these samples were analyzed. Results [WTBZ]Complete cellfree-pulmonary conduit matrix was achieved by trypsindetergent digestion. Compared with group A, in group B, the water content of pulmonary wall was significantly higher (P=0.000), while the water content of pulmonary valve was not significantly different; the thickness of pulmonary wall and valve (P=0.000，0.000) and tensile strength of pulmonary wall and valve (Plt;0.01） was significantly lower, while shrinkage temperature was not significantly different. Compared with group B, in group C, the water content of pulmonary wall was significantly lower (P=0.000), while the water content of pulmonary valve, and the thickness of pulmonary wall and valve were not significantly different; the tensile strength of pulmonary wall (Plt;0.01) and valve (P=0.000), and the shrinkage temperature of them (P=0.000, 0.000) were significantly higher. Compared with group A, in group C, the water content of pulmonary wall and valve, and the tensile strength of them were not statistically different, while the thickness of pulmonary wall and valve was significantly lower (P=0.000, 0.000), and the shrinkage temperature of them was significantly higher (P=0.000, 0.000). Conclusion [WTBZ]EDC crosslinking method is available for treating decellularized porcine pulmonary valved conduits in order to enhance its tensile strength, and decrease water content of pulmonary wall.
Objective To observe whether Cyclo-RGDfK (Arg-Gly-Asp-D-Phe-Lys) could enhance the adhesion of myofibroblast to decellularized scaffolds and upregulate the expression of Integrin αVβ3 gene. Methods Myofibroblast from the rat thoracic aorta was acquired by primary cell culture. The expression of Vimentin and α-smooth muscle actin(α-SMA) has been detected by immunoflurescent labeling. Decellularized valves have been randomly divided into three groups (each n=7). Group A (blank control): valves do not receive any pretreatment; Group B: valves reacted with linking agent NEthylN(3dimethylaminopropyl)carbodiimide hydrochloride (EDC) for 36 hours before being seeded; Experimental group: Cyclo-RGD peptide has been covalently immobilized onto the surface of scaffolds by linking agent EDC. The fifth generation of myofibroblast has been planted on the scaffolds of each group. The adhesion of myofibroblast to the scaffolds was evaluated by HE staining and electron scanning microscope. The expression of Integrin αVβ3 was quantified by halfquantitative reverse transcriptionpolymerase china reaction (RT-PCR). Results We can see that myofibroblast has exhibited b positive staining for Vimentin and α-SMA. Besides, it has been shown that the expression of Integrin αVβ3 was much higher in the experimental group than that of the group A and group B(Plt;0.05). There was no statistically difference in group A and group B (P=0.900). Conclusion RGD pretreatment does enhance the adhesive efficiency of seeding cells to the scaffolds and this effect may be related to the upregulation of Integrin αVβ3.
Objective To produce a decellularized cartilage matrix (DCM) and investigate its possibil ity to be used as a scaffold for tissue engineering. Methods Fresh bovine articular cartilage from knee joints was sl iced, freeze-dried and freeze-ground into fine powder, and then was treated sequentially with Trypsin, Triton X-100 and hypotonic solution for decellularization. The decellularized matrix was freeze-dried for shaping and cross-l inked by UV radiation. Histological, immunohistological, SEM, porosity assays and biomechanical assays were used to characterize the DCM. BMSCs were isolated from rabbit bone marrow aspirate and cultured in DCM extraction medium of different concentration (100%, 10% and 1%) for 0, 24, 48 and 72 hours, respectively, to detect the release rate of the lactate dehydrogenase (LDH). The DMEM medium (5% FBS) served as the control. Biocompatibil ity was evaluated using BMSCs (1 × 107/mL) cultured with DCM. Results The DCM showed white spongy appearances, and histological analysis showed that the material was constructed by cartilage particles without any cells or cell fragments left in the matrix. Immunohistology staining and alcian blue staining showed that DCM retained the collagen and glycosaminoglycan components of cartilaginous matrix. SEM scanning showed that DCM had a porous spongy-l ike structure with the aperture ranging 30-150 μm .The porosity assay showed that the average porosity was 89.37% and the average aperture was 90.8 μm. The mechanical assay showed that there was no difference for the compress module before and after the decellularization process, which was (17.91 ± 0.98) MPa and (15.12 ± 0.77) MPa, respectively (P gt; 0.05), but were both statistical different from normal articular cartilage [(26.30 ± 1.98) MPa, P lt; 0.05]. The LDH release rate in the DCM extraction medium of different concentration was not significantly different from that in the normal DMEM medium (P gt; 0.05). The cell adhesion test showed BMSCs grew well on DCM without any signs of growth inhibition. Conclusion Articular cartilage can be decellularized and fabricated into a scaffold which retains the major components of cartilaginous matrix. DCM has goodbiochemical, biophysical characteristics and good biocompatibil ity with cultured BMSCs and may be used as a novel scaffold for tissue engineering studies.