ObjectiveTo investigate the classification and treatment strategies of symptomatic severe osteoporotic vertebral fracture and collapse. MethodsBetween August 2010 and January 2014, 42 patients with symptomatic severe osteoporotic vertebral fracture and collapse were treated, and the clinical data were retrospectively analyzed. According to clinical symptom and imaging materials, 23 cases were classified as type I (local pain, limitation of motion, no neurological symptom, and no obvious deformity), 12 cases as type II (slight neurological symptom and kyphotic Cobb angle ≤ 30°), and 7 cases as type III (severe neurological symptom and kyphotic Cobb angle <30°). In 23 type I patients, 17 underwent percutaneous vertebral augmentation, 6 underwent posterior pedicle screw fixation strengthened with bone cement combined with percutaneous vertebral augmentation. In 12 type II patients, they were treated with local spinal decompression and internal fixation strengthened with bone cement. In 7 type III patients, 5 underwent posterior osteotomy, and 2 underwent one stage posterior approach of vertebral resection and reconstruction. The visual analogue scale (VAS), Oswestry disability index (ODI), and local kyphotic Cobb angle were used to evaluate the neurological function. The complications were recorded. ResultsThe operation was successfully completed in all patients. Wound infection and ketoacidosis secondary to stress blood glucose rise occurred in 1 case of type III patients respectively, and were cured after corresponding treatment; primary healing of wound was obtained in the other patients. The patients were followed up from 6 to 36 months (mean, 11.6 months). The nerve function was improved in 17 cases, and micturition disability was observed in 2 cases. Asymptomatic cement leakage occurred in 13 cases (30.95%) (7 cases in type I, 4 cases in type II, and 2 cases in type III). No bone cement dislocation and internal fixation failure were found during follow-up. The VAS score, ODI, and the local kyphotic Cobb angle at 1 week and last follow-up were significantly improved when compared with preoperative ones (P<0.05), but no significant difference was found between at 1 week and last follow-up (P>0.05). ConclusionIn order to improve the effectiveness and reduce the risk and complications of operation, individualized strategies should be performed according to different types of severe osteoporotic vertebral fracture and collapse.
Objective To investigate the effectiveness of multilevel Ponte osteotomies on maintenance and restoration of thoracic kyphosis in idiopathic scoliosis (IS) surgery. Methods Between March 2008 and February 2010, 42 patients with thoracic IS (Lenke type 1 curves) were corrected with posterior pedicle screw system. Multilevel Ponte osteostomies for posterior release was performed in 17 cases (group A), and the 3 segments near the apical vertebrae were selected as the osteotomy site; simple posterior soft tissue release was given in 25 cases (group B). There was no significant difference in sex, age, disease duration, lesion segments, coronary Cobb angle, thoracic kyphosis, Risser index, and bending flexibility between 2 groups (P gt; 0.05). The anteroposterior and lateral standing radiographs of the spine were taken to compare the effectiveness between 2 groups. Results Operation was successfully completed in all patients. The operation time and blood loss in group A were significantly greater than those in group B (P lt; 0.05). Spine dural injury and leakage of cerebrospinal fluid occurred in 1 case of group A, which was cured after compression on local area of the wound; the other patients had no intraoperative complications. The patients were followed up 2-4 years (mean, 2.8 years); no nerve injury, infection, or internal fixation failure occurred. No obvious correction loss was observed and the appearance and trunk balance were significantly improved. The coronal Cobb angles at 1 week and 2 years after operation were significantly improved when compared with preoperative ones in 2 groups (P lt; 0.05). There was no significant difference in the coronal Cobb angle and correction rate between 2 groups at 1 week and 2 years after operation (P gt; 0.05). Group A was significantly better than group B in the thoracic kyphotic angle and angle changes at 1 week and 2 years after operation (P lt; 0.05). Conclusion The posterior approach surgery with multilevel Ponte osteotomies can restore the thoracic kyphosis in IS, but it has no effect on coronal correction in Lenke type 1 curves.
ObjectiveTo introduce the application of Photoshop CS16.0 (PS) software in preoperative osteotomy design of ankylosing spondylitis kyphosis (ASK), and to investigate applied values of the preoperative design. MethodsBetween March 2009 and March 2013, 21 cases of ASK were treated through preoperative osteotomy design by using PS software. There were 16 males and 5 females, aged from 23 to 50 years (mean, 34.2 years). The deformity included thoracolumbar kyphosis in 14 cases, thoracic kyphosis in 2 cases, and lumbar kyphosis in 5 cases. The ultimate osteotomy angle of preoperative plans and the location and extent of osteotomy were determined by the osteotomy design, which guided operation procedures of the surgeon. The actual osteotomy angle was obtained by measuring Cobb angle of osteotomy segment before and after operation. The sagittal parameters of spine and pelvis including global kyphosis (GK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT), and chin brow-vertical angle (CBVA) were measured at preoperation, at 1 week after operation, and last follow-up. The clinical outcomes were assessed by simplified Chinese Scoliosis Research Society-22 (SRS-22) questionnaire and Oswestry disability index (ODI). ResultsNo complications occurred in the other cases except 1 case of dural tear during operation and 1 case of nerve injury after operation, and primary healing of incision was obtained. All patients were followed up 14 to 45 months (mean, 26.3 months). The SRS-22 and ODI scores at 1 week after operation and last follow-up were significantly improved when compared with preoperative scores (P<0.05), but no significant difference was found between at 1 week and last follow-up (P>0.05). The preoperative planned osteotomy angle and the postoperative actual osteotomy angle were (34.2±10.5)° and (33.7±9.7)° respectively, showing no significant difference (t=0.84, P=0.42). The CBVA, GK, SVA, PT, and LL were significantly improved when compared with the preoperative values (P<0.05), but no significant difference was found between at 1 week and last follow-up (P>0.05). At last follow-up, no failures of internal fixation was found, and bony fusion was obtained. ConclusionThe preoperative osteotomy design by using PS software can precisely recover the spinal sagittal balance and horizontal angle of view, so it can effectively avoid excessive correction and insufficient correction of the deformity and obtain good effectiveness in treating ASK.
Objective To find an effective method of surgical treatment of fibrous dysplasia of bone involving the proximal femur. Methods From January 2001 to January 2006, 57 patients with fibrous dysplasia of bone involving the proximal femur were treated. There were 29 males and 28 females, aging 8-50 years (mean 22 years). Thirty-five patients wereinvolved one bone and 22 patients were involved more than two bones. According to Guille’s classification, there were 34 cases of type A, 8 cases of type B, 8 cases of type C and 7 cases of type D. Fourteen cases compl icated by coax varus and the neck-shaft angle of femur was 78° on average (55-100°). The duration of the disease was 2.3 years on average (4 months to 10 years). The choice of the various operative procedures depended on the qual ity of the bone and the extent of the lesion. When the qual ity of the bone was good, then curettage and bone-grafting was performed. When the qual ity of the bone was poor, curettage and bone-grafting combined with internal fixation was performed. Medial displacement valgus or valgus osteotomies were used to treat fibrous dysplasia of bone involving the proximal part of the femur with coax varus. Results All patients were followed up for 6 months to 5 years with an average of 2.8 years. All bone graft were absorbed sl ightly at 3 months and markedly at 10 to 14 months postoperatively. The femoral mechanical al ignments were corrected completely radiologically in patients compl icated by coax varus; the average neck-shaft angle was corrected from 78° (55-100°) preoperatively to 122° (95-130°) postoperatively. The relative length of femur was increased 1.8-3.6 cm (mean 2.7 cm). After operation, 49 patients could walk without support, 5 with claudication, 3 ambulated with the aid of unilateral cane. Pain disappeared in 52 patients and pain was improved in 5 patients. No infections and recurrent fracture and progression of the deformity occurred in all patients. Conclusion Impactionallograft is the key of prompting allograft incorporating fully and preventing pathological fracture. An effective internal fixation must be used when the qual ity of the bone is poor. Medial displacement valgus or varus osteotomies can correct varus deformity, improve function, as well as restore biomechanical axis of femur. It is also able to effectively eradicate lesions and prevent recurrence.
ObjectiveTo study the function and effectiveness of self-manufacture osteotomy guide device in osteotomy. MethodsA guide device was manufactured, which could guide the drill and osteotome. Sixty femoral moulds which cover with bubble were used as human femurs, and a 3 cm long, 1 cm wide crack was made in the femoral moulds supracondylar to imitate operation incision. The femoral moulds were divided into 3 groups (n=20): non-guiding group (group A), simple drill guiding group (group B), and drill-osteotome guiding group (group C). The osteotomy time, the variation range of the drill holes (incision side and the contralateral side), the variation range of the osteotome incisions (incision side and the contralateral side), and the match rate of drill holes and osteotome incision were recorded. And between February 2013 and January 2014, the osteotomy guide device was used to guide proximal tibia osteotomy in 6 patients with tibia infected nonunion to excise of infected bones. ResultsThe osteotomy time of groups B and C was significantly less than that of group A, and it was significantly less in group C than group B (P<0.01). The match rate of drill holes and osteotome incision in groups B and C was significantly higher than that of group A, and group C was significantly higher than group B (P<0.05). The variation range of the drill holes in both incision side and contralateral side of groups B and C was 0, which was significantly less than that of group A (P<0.01). The variation range of the osteotome incisions in both incision side and contralateral side of groups B and C was significantly less than that of group A, group C was significantly less than group B (P<0.01). Preliminary clinical results showed that the osteotomy guide device was simple to use, and precise in guidance for drill and osteotome, so it could reduce the time for repeated targeting during drilling and osteoming. The osteotomy time was 8.3-11.2 minutes (mean, 9.5 minutes). The surface of osteotomy was smooth and no split;and there was rich callus formation during bone transport. Six patients were followed up 13-25 months (mean, 16 months). The bone healing index was 0.92±0.13. ConclusionThe osteotomy guide device can reduce the damage to surrounding tissue and bone caused by drill and osteotome, reduce the difficulty of osteotomy, and significantly shorten the cost time.
ObjectiveTo investigate the feasibility and effectiveness of a personalized distal femoral valgus resection angle for improving postoperative coronal alignment of lower limb in total knee arthroplasty (TKA). MethodsA retrospective analysis was made on the clinical data of 50 patients who received primary TKA between January 2013 and February 2013. There were 11 male and 39 female patients with degenerative knee osteoarthritis. The patients were divided into 2 groups. In test group (n=25), the resection angle was adjusted to the femoral mechanical anatomical angle (FMA); in control group (n=25), a fixed distal valgus resection angle of 5° was used. There was no significant difference in gender, age, body mass index, disease duration, sides, grade, preoperative FMA, mechanical femorotibial angle (MFT), and preoperative Knee Society Score (KSS) between 2 groups (P>0.05). Whole long X-ray film was taken to measure FMA and MFT at 3 days after operation, postoperative KSS was used to evaluate the knee function after 6 and 15 months. ResultsMFT was (-0.20±1.87)° in test group and was (1.71±3.67)° in control group, showing significant difference between 2 groups (t=2.32, P=0.02). The ideal MFT angle (0±3)° was achieved in 22 patients (88%) of test group and in 16 patients (64%) of control group, showing significant difference between 2 groups (χ2=2.32, P=0.02). Primary healing of incision was obtained in all patients of 2 groups. No deep venous thrombosis occurred. The patients of 2 groups were followed up 15 months after operation. There was significant difference in KSS between test and control groups at 6 months (88.23±2.57 vs. 82.92±2.59) (t=7.26, P=0.00) and at 15 months (90.76±2.77 vs. 88.65±1.77) (t=3.20, P=0.02). No sign of prosthesis loosening was observed by X-ray examination. ConclusionCompared with using of a fixed distal femoral resection angle, an individual FMA can significantly improve the postoperative MFT and promote early recovery of the knee function.
ObjectiveTo investigate the effectiveness of a modified surgical treatment of old Monteggia fracture. MethodsBetween March 2006 and December 2013, 40 cases of old Monteggia fracture were treated with modified operation. Modified operation procedure included expanding excision of pedicled forearm fascia flap for reconstruction of the annular ligament and repair of elbow radial lateral collateral ligament complex and extending osteotomy of the ulna, callus replantation, and internal fixation with steel plate. There were 26 boys and 14 girls, aged 2-10 years with an average age of 4 years. Injury was caused by falling in 24 cases, by traffic accident in 8 cases, and by falling from height in 8 cases. The disease duration was 2-11 months (mean, 4 months). Four patients had combined radial nerve palsy. ResultsIncision healed by first intention after operation, without early complication of radial nerve palsy, fascial compartment syndrome, or decreased hand extensor muscle strength. All the children were followed up 1-5 years (mean, 2.5 years). X-ray films showed fracture healing, and the healing time was 10-20 weeks (mean, 15 weeks). During follow-up, 3 cases had re-dislocation. Neither hand dysfunction caused by hand muscle adhesion nor radial head bottleneck shape change was found. On the basis of the functional evaluation criteria by Mackay, the results were excellent in 32 cases, good in 5 cases, and poor in 3 cases; the excellent and good rate was 92.5% at last follow-up. ConclusionThe modified surgical treatment of old Monteggia fracture is an effective method, with good matching of humeroradial joint and without internal fixation of the humeroradial joint.
Objective To summarize the surgical technique and the effectiveness of Becker V-shaped lateral rotation osteotomy in total hip arthroplasty (THA) for Crowe type IV development dislocation of the hip (DDH). Methods Between January 2000 and December 2009, 18 patients (22 hips) with Crowe type IV DDH underwent THA. There were 3 males and 15 females with an average age of 54 years (range, 41-75 years). The unilateral hip was involved in 14 cases and bilateral hips in 4 cases. All patients had over anteversion of the femoral neck, with the acetabular anteversion angle of (21.28 ± 4.87)°, the femoral neck anteversion angle of (59.06 ± 1.44)°, and combined anteversion angle of (80.33 ± 1.55)°. All the patients had limb-length discrepancy, ranged from 1.0 to 3.5 cm (mean, 2.5 cm). Before operation, gluteus medius muscle strength was grade 2 in 17 hips and grade 3 in 5 hips; severe or moderate claudication was observed in 13 and 5 patients, respectively. Trendelenburg sign was positive in all patients. Preoperative Harris score was 30.00 ± 6.32. Cementless prosthesis was used. Becker V-shaped lateral rotation osteotomy and subtrochanteric shortening with overlapping femoral resection were performed, and proximal femoral shaft splitting was performed on 21 hips having narrow bone marrow cavity. Results All the cases achieved primary healing of incision. No complication of anterior dislocation, deep infection, nerve traction injury, or femoral uncontrolled fracture occurred. All the cases were followed up 3-12 years (mean, 8 years). Postoperative X-ray films showed that the initial fixation result of femoral prosthesis was excellent in 18 hips and good in 4 hips. Bone healing of osteotomy stump was obtained at 3-6 months (mean, 5 months) after operation. Affected limb prolonged for 2.5-3.5 cm (mean, 3.0 cm ) at 1 year after operation; limb-length discrepancy was 0.5-1.5 cm (mean, 1.0 cm). The gluteus medius muscle strength was restored to grade 4 in 5 hips and grade 5 in 17 hips. At last follow-up, 13 patients had no claudication, and 5 patients had mild claudication; Trendelenburg sign was negative in 15 cases and was positive in 3 cases; the Harris score was significantly improved to 91.89 ± 3.22; all showing significant difference when compared with preoperative ones (P lt; 0.05). At last follow-up, the acetabular anteversion angle, the femoral neck anteversion angle, and combined anteversion angle were (19.33 ± 4.49), (13.33 ± 5.70), and (32.67 ± 5.35)°, respectively, all showing significant differences when compared with preoperative ones (P lt; 0.05). No aseptic loosening, osteolysis, or rediolucent line was found around the femoral component. No implant subsidence, stem varus, or revision occurred. Conclusion Becker V-shaped lateral rotation osteotomy is a safe and predictable method to treat type Crowe type IV DDH.
Objective To evaluate the clinical outcomes ofa surgical approach for decompression of lumbar spinal stenosis, which was featured with reconstruction of posterior spinal structures and epidural space by spinous process-splitting, less osteotomy, laminar flap and keeping spinal process, lamina, outer ligmentum flavum intact. Methods From October 2001 to April 2003, 39 patients (19 males and 20 females, aging 36 to 77 years with a mean age of 49.6 years with lumbar stenosis underwent the surgical decompression procedure with reconstruction of posterior canal structures and epidural space. The involved locations were L3,4 to L5S1(5 cases),L4,5 to L5S1(18 cases), L4,5(11 cases) and L5S1(5 cases). The course of disease was 3 months to 16 years (40.4 months on average). The clinical outcomes after 1 year of operation Results All patients were followed up from 18 to 36 months. No intraoperative and postoperative complications were observed and all patients were satisfactory with the surgery. Computerized tomography showed that spinal and nerve root canal were satisfactorily enlarged 1 week postoperatively in all cases. Fusion of lamina and spinous process were detected on CT in 87.2% patients (34/39) 3 months after operation. No patients presented re-stenosis of lumbar spine and all patients presented bony fusion 1 year after surgery. Conclusion The approach of the current study was a reliable and effective method in the management of lumbar stenosis, it preserved thecontinuity of spinal process, interspinous ligaments, lamina and ligmentumn flavum and integrality of posterior spinal structures and epidural space. The integrity of the psoterior spinal structures can prevent the scar formation and improve the stability of lmbar spine postoperatively.
ObjectiveTo explore the effectiveness of the zygomatic spindle-shaped osteotomy and internal push of titanium screw anchor for prominent malar. MethodBetween July 2011 and January 2015, 58 patients with prominent malar underwent zygomatic spindle-shaped osteotomy and internal push of titanium screw anchor. There were 3 males and 55 females, aged 18-33 years (mean, 23 years). They had congenital bilateral prominent malar. Preoperative anteroposterior, lateral, supine position, 45°oblique photographs of the face were taken, three-dimensional CT reconstruction of face was performed. Simple prominent malar was observed in 30 cases, and prominent malar and zygomatic arch in 28 cases; zygomatic bone and zygomatic arch were symmetrical in 51 cases, and asymmetrical in 7 cases. ResultsAll patients obtained stage I incision healing after operation, without infection or hematoma. Numbness of the upper lip occurred in 2 cases, limitation of mouth opening in 1 case, and nasolabial fold deepening in 1 case, which recovered spontaneously after 3 months. Fifty-eight cases were followed up 6-12 months (mean, 10 months). Zygomatic narrow spacing was 10.6-13.9 mm (mean, 11.2 mm). No ptosis of facial soft tissue, zygomatic step, facial nerve injury, raising eyebrow, dysfunction of eyes closure, or temporomandibular joint disorder syndrome occurred. Good bone healing was obtained, zygomatic facial sensation had no obvious abnormality, all patients were satisfied with the improvement of appearance. ConclusionsZygomatic spindle-shaped osteotomy and internal push titanium screw anchor can effectively reduce the cheekbones, and maintain the natural curve of zygomatic body and zygomatic arch. Because of simple operation, less complications, and excellent results, it is an ideal plasty.