Objective To understand the value of pre-coating in artificial vessel endothelialization. Methods Literature concerning precoating in artificial vessel endothelialization was extensively reviewed. Results Pre-coating included chemical coatings(collagen, fibronectin, laminin, poly-l-lysin, gelatin andextracellular matrix), pre-clotting(plasma, blood, serum and fibrin glue), chemical bonding (heparin, RGD and lectins) and surface modification. Most of them could enhance the adhesion of the endothelial cells. Conclusion Pre-coating couldimprove endothelialization, but further research is needed to search for the appropriate concentration and incubation time.
ObjectiveTo review the current research and application progress of three-dimentional (3D) printed porous titanium alloy after tumor resection, and provide direction and reference for the follow-up clinical application and basic research of 3D printed porous titanium alloy. MethodsThe related literature on research and application of 3D printed porous titanium alloy after tumor resection in recent years was reviewed from three aspects: performance of simple 3D printed porous titanium alloy, application analysis of simple 3D printed porous titanium alloy after tumor resection, and research progress of anti-tumor 3D printed porous titanium alloy. Results3D printing technology can adjust the pore parameters of porous titanium alloy, so that it has the same biomechanical properties as bone. Appropriate pore parameters are conducive to inducing bone growth, promoting the recovery of skeletal system and related functions, and improving the quality of life of patients after operation. Simple 3D printed porous titanium alloy can more accurately match the bone defect after tumor resection through preoperative personalized design, so that it can closely fit the surgical margin after tumor resection, and improve the accuracy and efficiency of the operation. The early and mid-term follow-up results show that its application reduces the postoperative complications such as implant loosening, subsidence, fracture and so on, and enhances the bone stability. The anti-tumor performance of 3D printed porous titanium alloy mainly includes coating and drug-loading treatment of pure 3D printed porous titanium alloy, and some progress has been made in the basic research stage. ConclusionSimple 3D printed porous titanium alloy is suitable for patients with large and complex bone defects after tumor resection, and the anti-tumor effect of 3D printed porous titanium alloy can be achieved through coating and drug delivery.
Objective To investigate the research progress of drug-loaded antibacterial coating of orthopedic metal implants in recent years. Methods The recent literature on the drug-loaded antibacterial coating of orthopedic metal implants were reviewed. The research status, classification, and development trend of drug-loaded antibacterial coating were summarized. Results The drug-loaded antibacterial coating of orthopedic metal implants can be divided into passive release type and active release type according to the mode of drug release. Passive drug release coating can release the drug continuously regardless of whether the presence of bacteria around the implants. Active drug release coating do not release the drug unless the presence of bacteria around the implants. Conclusion The sustained and stable release of drugs is a key problem to be solved in various antibacterial coatings research. The intelligent antibacterial coating which release antibiotics only in the presence of bacteria is the future direction of development.
Objective To prepare silver-containing hydroxyapatite coating (hydroxyapatite/Ag, HA/Ag) and investigate its antibacterial property and biocompatibil ity in vitro. Methods Vacuum plasma spraying technique was adopted to prepare HA/Ag coating on titanium alloy substrate (3% Ag). After incubating the HA/Ag and the HA coating under staphylococcus aureus and pseudomonas aeruginosa suspensions of 2% tryptic soy broth (TBS) medium for 2, 4 and 7 days, respectively, the biofilm on the coatings was examined by confocal laser scanning microscope, and the bacterial density and viable bacterial percentage of bacterial biofilm were calculated. Meanwhile, the micro-morphology of bacterial biofilm was observed by SEM, the cytotoxicity was detected via MTT and the biocompatibil ity of biofilm was evaluated by acute aemolysis test. Results Compared with HA coating, the bacterial biofilm’s thickness on the surface of HA/Ag coating witnessed no significant difference at 2 days after culture (Pgt; 0.05), but decreased obviously at 4 and 7 days after culture (P lt; 0.01). The bacterial density of the biofilm increased with time, but there was no significant difference between two coatings (P gt; 0.05) at 2, 4 and 7 days after culture. The viable bacterial percentage of the biofilms on the surface of HA/Ag coating decreased obviously compared with that of HA coating at 2, 4 and 7 days after cultureP lt; 0.01). The MTT notified the cytotoxic grade of both coatings was zero. The acute haemolysis assay showed that the hemolytic rate of HA/Ag and HA coating was 0.19% and 0.12%, respectively. Conclusion With good biocompatibil ity, significant antibacterial property against staphylococcus aureus and pseudomonas aeruginosa, no obvious cytotoxicity and no erythrocyte destruction, the vacuum plasma sprayed HA/Ag coating is a promising candidate for the surface of orthopedic metal implants to improve their osseointegration and antibacterial property.
Objective Surface modification of nitinol (NiTi) shape memory alloy is an available method to prevent nickel ion release and coating with titanium-niobium (TiNb) alloy will not affect the superelasticity and shape memory of NiTi. To evaluate the bone histocompatibil ity of NiTi shape memory alloy implants coated by TiNb in vivo. Methods NiTi memory alloy columns which were 4 mm in diameter and 12 mm in length were coated with Ti (Ti-coating group) and TiNb alloy (TiNb-coating group) respectively by magnetron sputtering technique. And NiTi group were not coated on the surface. Fifteen mongrel dogs were divided into 3 groups randomly with 5 dogs in each group. NiTi, Ti-coating and TiNb-coating columns were implanted into the lateral femoral cortex of each group, respectively. There were 10 columns embedded in eachdog’s femur whose distance was 1.0 cm to 1.5 cm from each other. The materials were obtained 12 months after operation. After X-ray photography, only those columns which were perpendicular to the cortex of the femur shaft were selected for subsequent analysis. Push-out tests were performed to attain the maximum shear strength (the number of specimens of TiNi group, Ticoating group, and TiNb-coating group were 12, 10, and 14, respectively). Undecalcified sections were used for histological observation and the calculation of osseointegration rate (the number of specimens of TiNi group, Ti-coating group, and TiNb-coating group were 8, 5, and 10, respectively). Results The maximum shear strength of Ti-coating group (95.10 ± 10.03) MPa, and TiNb-coating group (91.20 ± 15.42) MPa were significantly higher than that of NiTi group (71.60 ± 14.24) MPa (P lt; 0.01). Gimesa staining showed that no obvious macrophage and inflammation cell was observed in 3 groups. The osseointegration rates of NiTi group, Ti-coating group, and TiNb-coating group were (21.30% ± 0.23%), (32.50% ± 0.31%), and (38.60% ± 0.58%), respectively; there were significant differences among 3 groups (P lt; 0.01). Conclusion The implants of 3 groups all have good bone histocompatabil ity. But the osseointegration rate and the shear strength in the Ti-coating group and the TiNb-coating group were better than those in the NiTi group, the TiNb-coating group is the best among them.
An oxide ceramic coating can be formed on the surface of magnesium alloy by micro-arc oxidation so that the corrosion resistance of the magnesium alloy can be enhanced. In this paper, a general overview of the surface treatment of micro-arc oxidation on the surface of magnesium alloy is presented, the related research on the treatment of several kinds of magnesium alloys is introduced in detail, and a brief introduction of biological activity of magnesium alloy due to micro-arc oxidation is given. Finally, the technical advantages and existing problems are summarized.
ObjectiveTo review the research progress of cementless intercalary prosthesis stem. MethodsThe literature about the cementless intercalary prosthesis in treatment of bone defects of extremities was reviewed, and the designing and application of prosthesis stem were analyzed. ResultsCementless intercalary prosthesis has the advantages of good biocompatibility. However, there are also some disadvantages, including the multiple factors affecting the fixation of the prosthesis stem and individual differences in the stability of the prosthesis. The methods to improve the fixation stability of prosthesis stem mainly include the optimization of prosthesis stem shape, addition of auxiliary fixation, and improvement of coating materials on the stem surface as well as porous structure of the stem surface. Among these methods, augment with auxiliary fixation has the most satisfactory effect on improving the stability of prosthesis. However, the deficiency of the method is the increasing risk of the larger incision exposure and surgical trauma. ConclusionImproving the design and fixation method of the cementless intercalary prosthesis stem can further improve the stability of the prosthesis. Under the premise of avoiding increasing surgical trauma as much as possible, addition of the auxiliary fixation can be a feasible choice to improve the fixation stability of prosthesis.
Objective To research in vitro biocompatibility of silicon containing micro-arc oxidation (MAO) coated magnesium alloy ZK60 with osteoblasts. Methods The surface microstructure of silicon containing MAO coated magnesium alloy ZK60 was observed by a scanning electron microscopy (SEM), and chemical composition of the coating surface was determined by energy dispersive spectrum analysis. The experiments were divided into 4 groups: silicon containing MAO coated magnesium alloy ZK60 group (group A), uncoated magnesium alloy ZK60 group (group B), titanium alloy group (group C), and negative control group (group D). Extracts were prepared respectively with the surface area to extraction medium ratio (1.25 cm2/ mL) according to ISO 10993-12 standard in groups A, B, and C, and were used to culture osteoblasts MC3T3-E1. The α-MEM medium supplemented with 10% fetal bovine serum was used as negative control in group D. The cell morphology was observed by inverted phase contrast microscopy. MTT assay was used to determine the cell viability. The activity of alkaline phosphatase (ALP) was detected. Cell attachment morphology on the surface of different samples was observed by SEM. The capability of protein adsorption of the coating surface was assayed, then DAPI and calcein-AM/ethidium homodimer 1 (calcein-AM/EthD-1) staining were carried out to observe cell adhesion and growth status. Results The surface characterization showed a rough and porous layer with major composition of Mg, O, and Si on the surface of silicon containing MAO coated magnesium alloy ZK60 by SEM. After cultured with the extract, cells grew well and presented good shape in all groups by inverted phase contrast microscopy, group A was even better than the other groups. At 5 days, MTT assay showed that group A presented a higher cell proliferation than the other groups (P lt; 0.05). Osteoblasts in groups A and C presented a better cell extension than group B under SEM, and group A exhibited better cell adhesion and affinity. Protein adsorption in group A [ (152.7 ± 6.3) µg/mL] was significantly higher than that of group B [(96.3 ± 3.9) µg/mL] and group C [ (96.1 ± 8.7) µg/mL] (P lt; 0.05). At each time point, the adherent cells on the sample surface of group A were significantly more than those of groups B and C (P lt; 0.05). The calcein-AM/EthD-1 staining showed that groups A and C presented better cell adhesion and growth status than group B. The ALP activities in groups A and B were 15.55 ± 0.29 and 13.75 ± 0.44 respectively, which were significantly higher than those in group C (10.43 ± 0.79) and group D (10.73 ± 0.47) (P lt; 0.05), and group A was significantly higher than group B (P lt; 0.05). Conclusion The silicon containing MAO coated magnesium alloy ZK60 has obvious promoting effects on the proliferation, adhesion, and differentiation of osteoblasts, showing a good biocompatibility, so it might be an ideal surface modification method on magnesium alloys.
Objective To design and construct a graphene oxide (GO)/silver nitrate (Ag3PO4)/chitosan (CS) composite coating for rapidly killing bacteria and preventing postoperative infection in implant surgery. Methods GO/Ag3PO4 composites were prepared by ion exchange method, and CS and GO/Ag3PO4 composites were deposited on medical titanium (Ti) sheets successively. The morphology, physical image, photothermal and photocatalytic ability, antibacterial ability, and adhesion to the matrix of the materials were characterized. Results The GO/Ag3PO4 composites were successfully prepared by ion exchange method and the heterogeneous structure of GO/Ag3PO4 was proved by morphology phase test. The heterogeneous structure formed by Ag3PO4 and GO reduced the band gap from 1.79 eV to 1.39 eV which could be excited by 808 nm near-infrared light. The photothermal and photocatalytic experiments proved that the GO/Ag3PO4/CS coating had excellent photothermal and photodynamic properties. In vitro antibacterial experiments showed that the antibacterial rate of the GO/Ag3PO4/CS composite coating against Staphylococcus aureus reached 99.81% after 20 minutes irradiation with 808 nm near-infrared light. At the same time, the composite coating had excellent light stability, which could provide stable and sustained antibacterial effect. ConclusionGO/Ag3PO4/CS coating can be excited by 808 nm near infrared light to produce reactive oxygen species, which has excellent antibacterial activity under light.
ObjectiveThe antibacterial properties of porous medical implant materials were reviewed to provide guidance for further improvement of new medical implant materials.MethodsThe literature related to the antibacterial properties of porous medical implant materials in recent years was consulted, and the classification, characteristics and applications, and antibacterial methods of porous medical implant materials were reviewed.ResultsPorous medical implant materials can be classified according to surface pore size, preparation process, degree of degradation in vivo, and material source. It is widely used in the medical field due to its good biocompatibility and biomechanical properties. Nevertheless, the antibacterial properties of porous medical implant materials themselves are not obvious, and their antibacterial properties need to be improved through structural modification, overall modification, and coating modification.ConclusionAt present, coating modification as the mainstream modification method for improving the antibacterial properties of porous medical materials is still a research hotspot. The introduction of new antibacterial substances provides a new perspective for the development of new coated porous medical implant materials, so that the porous medical implant materials have a more reliable antibacterial effect while taking into account biocompatibility.