ObjectiveTo explore the value of recombinant inferior vena cava filter (IVCF) in the prevention of perioperative pulmonary embolism in patients with lower limb or pelvic fracture combined with deep venous thrombosis (DVT).MethodsThe clinical data of 168 patients with lower limb or pelvic fracture combined with DVT were analyzed retrospectively.ResultsThe filters were successfully implanted in 168 patients, and the recoverable filters were removed after (48.3±4.8) d (14–97 d). The filters were removed successfully in 159 cases, and the removal rate was 94.6%. Sixty-one cases were found to have thrombus on the filter after contrast examination or removal of vena cava filter, that is, the thrombus interception rate was 36.3%.ConclusionFor patients with lower limb or pelvic fracture combined with DVT, the rechargeable vena cava filter can effectively stop thrombosis and avoid pulmonary embolism.
Objective To investigate the surgical technique and effectiveness of titanium elastic nail (TEN) assisted retrograde channel screw implantation of superior pubic branch. Methods The clinical data of 31 patients with pelvic or acetabular fractures treated with retrograde channel screw implantation in superior pubic branch between January 2021 and April 2022 were retrospectively analyzed. Among them, 16 cases were implanted with assistance of TEN (study group) and 15 cases were implanted under the guidance of C-arm X-ray machine (control group). There was no significant difference in gender, age, cause of injury, Tile classification of pelvic fracture, Judet-Letournal classification of acetabular fracture, and time from injury to operation between the two groups (P>0.05). The operation time, fluoroscopy times, and intraoperative blood loss of each superior pubic branch retrograde channel screw were recorded during operation. X-ray films and three-dimensional CT were reexamined after operation, the quality of fracture reduction was evaluated by Matta score standard, and the position of channel screw was evaluated by screw position classification standard. The fracture healing time was recorded during the follow-up, and the postoperative functional recovery was evaluated by Merle D’Aubigne Postel score system at last follow-up. Results Nineteen and 20 retrograde channel screws of superior pubic branch were implanted in the study group and the control group, respectively. The operation time, fluoroscopy times, and intraoperative blood loss of each screw in the study group were significantly less than those in the control group (P<0.05). According to the postoperative X-ray films and three-dimensional CT, none of the 19 screws in the study group penetrated out of the cortical bone or into the joint, and the excellent and good rate was 100% (19/19); in the control group, there were 4 screws of cortical bone penetration, and the excellent and good rate was 80% (16/20); the difference between the two groups was significant (P<0.05). Matta score standard was used to evaluate the quality of fracture reduction, there was no patient in the two groups with poor reduction results, and the difference was not significant between the two groups (P>0.05). The incisions of the two groups healed by first intention, and there was no complication such as incision infection, skin margin necrosis, and deep infection. All patients were followed up 8-22 months, with an average of 14.7 months. There was no significant difference in healing time between the two groups (P>0.05). At last follow-up, the difference in functional recovery evaluated by the Merle D’Aubigne Postel scoring system between the two groups was not significant (P>0.05). Conclusion TEN assisted implantation technique can significantly shorten the operation time of retrograde channel screw implantation of superior pubic branch, reduce the times of fluoroscopy, and have less intraoperative blood loss and accurate screw implantation, which provides a new safe and reliable method for minimally invasive treatment of pelvic and acetabular fractures.
Objective To investigate the method and the effectiveness of open pelvic fractures associated with perineal injury. Methods Between August 2000 and July 2010, 16 cases of open pelvic fractures associated with perineal injury weretreated. There were 12 males and 4 females with an average age of 41 years (range, 17-69 years). Injury was caused by traffic accidents in 9 cases, by falling from height in 6 cases, and by crushing in 1 case. The mean time between injury and admission was 8 minutes (range, 5-20 minutes). According to Tile classification, 2 cases were rated as type A, 6 as type B, and 8 as type C. The wound size ranged from 5 cm × 3 cm to 15 cm × 12 cm. The perineal injured location included intraperitoneal rectal injury in 2 cases and extraperitoneal anorectal injury in 14 cases. The average injury severity score (ISS) was 29 (range, 25-48). The main treatments included emergency resuscitation, colostomy, external fixation of fractures, repeated debridement with pulsatile irrigation followed by intravenous antibiotics, and vacuum seal ing drainage (VSD). Results In 5 deaths, 3 cases died of hemorrhagic shock and 2 cases died of multi ple system organ failure within 4 days of admission. The other 11 cases were followed up 6-46 months (mean, 14 months). The X-ray films showed that bone union was achieved after 2-4 months of operation. Infection in varying degree occurred at perineal wounds; second stage healing of wounds was achieved in 10 cases after debridement and VSD treatment, and wound healed in 1 case after gracil is muscle flap repair. No anal incontinence occurred in the patients having anorectal injury during follow-up. Conclusion For patients with perineal injury and open pelvic fractures, the following treatments should be carried out so as to obtain good effectiveness: early anti-shock, protection of important organ function, treatment of complications, late resistance to infection and stabil ity restoration of the pelvic ring, functional repair and reconstruction of rectum and anal canal and urinary tract.
【Abstract】 Objective To evaluate the effectiveness of percutaneous fixation with il iosacral screw in the management of unstable pelvic fractures. Methods From March 2003 to January 2007, 15 patients with unstable pelvic fractures were treated by percutaneous fixation with il iosacral screws. There were 6 males and 9 females, aged 21-56 years. Fractures were caused by traffic accident in 8 cases, high fall ing in 6 cases and crushing injury in 1 case. The disease course ranged from 4 hours to 3 days. Of 15 patients, 7 had fractures of pubium and sacrum; 2 had fractures of il ium and sacrum; 4 had dislocation of sacroil iac joint with fractures of pubic rami; and 2 had dislocation sacroil iac joint with fracture of sacrum of pubium. Anterior fixation was performed by means of plating in 3 cases, by external fixation in 7 cases, and by both in 5 cases. Results The blood loss was from 1 000 to 1 500 mL in 4 patients with acetabular fracture and about 50 mL in the others. The average operative time was 153.6 minutes (range, 60-305 minutes). Fifteen patients were followed up 6 months to 3 years with an average of 18months. According to Matta criterion for fracture reduction, the results were excellent in 14 cases and good in 1 case. After a follow-up of 28.8 months, fracture union was achieved in all patients. Screw loosening occurred in 1 case, pain of lumbosacral region in 3 cases after tiredness and mild claudication in 2 cases. Nine patients returned to their occupation, three patients changed occupation, and 3 patients could not work at last follow-up. According to Majeed functional scoring, the results were excellent in 11 cases and good in 4 cases. Conclusion Percutaneous il iosacral screw fixation is a useful method in treatment of unstable pelvic fracture.
Objective To investigate the effectiveness of minimally invasive plate fixation in treatment of unstable pelvic fractures. Methods Between May 2006 and December 2009, 21 patients with unstable pelvic fractures were treated. There were 13 males and 8 females with an average age of 39 years (range, 21-66 years). The causes of injury included traffic accident in 9 cases, falling from height in 6 cases, and heavy pound injury in 6 cases. The time from injury to hospitalization was 1 to 4 hours with an average of 2.8 hours. According to Tile’s classification, there were 12 cases of type B and 9 cases of type C. After admission, bone traction and exo fixation were performed, and minimally invasive plate fixation was given at 5-24 days after injury. Results All incisions healed by first intention, and no complications of nerve and vessel injuries occurred. According to the reduction criteria of Matta radiography, anatomic reduction was achieved in 16 cases, satisfactory reduction in 4 cases, and fair reduction in 1 case. All patients were followed up 12 months. The X-ray films showed all fractures healed at 2-4 months (mean, 2.6 months). According to Majeed clinical evaluation, the results were excellent in 12 cases, good in 7 cases, and fair in 2 cases. Conclusion Minimally invasive plate fixation can provide effective fixation, reconstruct pelvic ring, and reduce perioperative complications in the treatment of unstable pelvic fractures.
Objective To explore the effectiveness of Colorado 2TM system in the stabil ity reconstruction of sacroil iac joint fracture and dislocation in Tile C pelvic fracture. Methods Between February 2009 and January 2011，8 cases of Tile C pelvic fracture were treated with Colorado 2TM system. There were 3 males and 5 females with an average age of 34.4years (range，22-52 years). Fractures were caused by traffic accident in 3 cases, by fall ing from height in 3 cases，and by crash of heavy object in 2 cases. According to Tile classification, 5 cases were classified as C1-2, 2 cases as C1-3，and 1 case as C2. The time between injury and operation was 5-10 days (mean, 7 days). After skeletal traction reduction, Colorado 2TM system was used to fix sacroil iac joint, and reconstruction plate or external fixation was selectively adopted. Results The postoperative X-ray films showed that the reduction of vertical and rotatory dislocation was satisfactory, posterior pelvic ring achieved effective stabil ity. All the incisions healed by first intention, and no blood vessel or nerve injury occurred. Eight patients were followed up 6-24 months (mean, 12 months). No loosening or breakage of internal fixation was observed and no re-dislocation of sacroil iac joint occurred. The bone heal ing time was 6-12 months (mean, 9 months). According to Majeed’s functional criterion, the results were excellent in 5 cases, good in 2 cases, and fair in 1 case at last follow-up. Conclusion Colorado 2TM system could provide immediate stabil ity of pelvic posterior ring and good maintenance of reduction effect, which is an effective method in the therapy of sacroil iac joint fracture and dislocation in Tile C pelvic fracture.
Objective To explore the application of individualized transiliac crest nail-grafting guide plate prepared by computer-aided design and three-dimensional (3D) printing technology in deep pelvic external fixator implantation. Methods Five patients with pelvic fractures were collected between May 2017 and February 2018. There were 4 females and 1 male with an average age of 52 years (range, 29-68 years). Pelvic fractures were classified as type B in 3 cases and type C in 2 cases by Tile classification. The interval between injury and operation was 6-14 days (mean, 9 days). The preoperative CT images of pelvic fractures were collected. The data was reconstructed by 3D imaging reconstruction workstation. An individualized transiliac crest nail-grafting guide plate was designed on the virtual 3D model. The individualized transiliac crest nail-grafting guide plate and the solid pelvic model were produced with the 3D printing technology. The individualized transiliac crest nail-grafting guide plate was used for intraoperative deep pin position on iliac crest after the preoperative simulation. The follow-up CT scans were used to determine the differences in distance from anterior superior iliac spine, convergence angle, and caudal angle between the preoperative plan and postoperative measurement. Results During the operation, the individualized transiliac crest nail-grafting guide plate was used to guide the placement of 20 pins. X-ray film and CT examination showed that all pins were well positioned. The average depth of pins was 83.16 mm (range, 70.13-100.53 mm). Fitted 3D reconstruction images showed that the entry point and orientation of the pins were all consistent with preoperative schemes. Compared with the planned nail path, there was no significant difference in the distance from anterior superior iliac spine, convergence angle, and caudal angle in the actual nail path (P>0.05). No loosening and rupture of pin, no damage of blood vessels and nerve, and shallow or deep infection occurred during 3 months follow-up, and the incisions healed by first intention. All patients were satisfied with the treatment process. The ranges of motion of hip and knee were normal, and the visual analogue scale (VAS) score was 0-3 (mean, 0.5). Conclusion The individualized transiliac crest nail-grafting guide plate technique is the improvement of traditional technique. It can increase accuracy and effective depth of pin position, enable patients to obtain pelvic mechanical stability quickly after operation, and reduce the risk of complications related to nail path.
ObjectiveTo evaluate the effectiveness of unstable pelvic fractures treated by cannulated screw internal fixation with the assistance of three-dimensional (3D) printing insertion template.MethodsThe clinical data of 10 patients who underwent surgical treatment for unstable pelvic fractures by cannulated screw internal fixation with the assistance of 3D printing insertion template between May 2015 and June 2016 were retrospectively analysed. There were 7 males and 3 females with an average age of 37.5 years (range, 20-58 years). The causes of injury included falling from height in 5 cases, crushing from heavy load in 1 case, and traffic accidents in 4 cases. The interval from injury to admission was 1-5 hours (mean, 3.1 hours). The fracture situation included 6 cases of sacral fracture, 1 case of right sacroiliac joint dislocation, and 3 cases of iliac bone fracture. There were 10 cases of superior and inferior pubic rami fracture, including 3 cases on the left side (2 cases of suprapubic fracture adjacent to symphysis pubis), 2 cases on the right side, and 5 cases on the bilateral. All fractures were classified according to the Tile system, there were 4 cases of type B2, 1 of type B3, 4 of type C1, and 1 of type C2. The radiological outcome was evaluated by Matta scale, and the positions of the iliosacral screw and superior pubic ramus screw were evaluated according to 3D reconstruction of CT postoperatively. The functional outcome was evaluated by Majeed function scale.ResultsThe average time of each screw implantation was 30 minutes, and the average blood loss per screw incision was 50 mL. The time of implantation of each sacroiliac screw was 24-96 seconds (mean, 62 seconds), and the time of implantation of each suprapubic screw was 42-80 seconds (mean, 63.2 seconds). The hospitalization duration was 17-90 days (mean, 43.7 days). All incisions healed by first intention. All patients were followed up 12-22 months (mean, 15.6 months). The radiological outcome was excellent in 8 cases and good in 2 cases according to Matta scale; and 3D reconstruction of CT demonstrated that all the 9 iliosacral screws were placed as type Ⅰ, and all the 13 suprapubic ramus screws were placed as grade 0 on the first postoperative day. No complication such as neurovascular injury, screw back out or rupture, or secondary fracture displacement was observed during the follow-up. At 6 months after operation, the X-ray films showed good fracture healing in all the 10 patients. The functional outcome was excellent in 9 cases and good in 1 case according to Majeed scale at 1 year after operation. One patient sustained Tile C2 pelvic disruption complicated with L5 nerve root injury achieved complete nervous functional recovery at last follow-up.ConclusionIt has advantages of precise screw insertion and lower risk of neurovascular injury to treat unstable pelvic fractures by cannulated screw internal fixation with the assistance of 3D printing insertion template, which can be a good alternative for the treatment of unstable pelvic fractures.
【Abstract】 Objective To summary the effects of staged pelvic closure using external fixator combined withreconstruction plate for old Tile B1 pelvic fracture. Methods From August 2000 to August 2006, 14 patients (9 males and 5 females, age ranging from 21 to 65 years with old Tile B1 pelvic fracture with pubic symphysis separation were treated. The injuries were caused by the traffic accident in 10 patients, high crash in 3, and crush in 1. The duration ranged from 4 weeks to 3 months. The 14 patients were compl icated with other injuries in some degrees. The X-ray and CT showed pubic symphysis separation. In 13 patients, pubic symphysis separation distance was more than 2.5 cm, who also had fracture or dislocation in the posterior structure of pelvis. The X-ray films showed the mean pubic symphysis separation distance was (6.67 ± 2.11) cm preoperatively. The 14 patients underwent pelvic external fixation at first and staged pelvic closure gradually for the pubic symphysis separation. After 2 to 3 weeks, when the pubic symphysis separation distance was less than 1 cm, the patients underwent open reduction and internal fixation with reconstruction plate. Pubic symphysis separation distance was measuredin the preoperative and postoperative pelvic anterioposterior X-ray films. The condition of the posterior structure of pelvis was observed in CT films. The functions of patients were assessed according to Majeed grading system. Results All incisions healed by first intention. The 14 patients were followed up for 6 months to 2 years (15 months on average). The X-ray films showed the mean pubic symphysis separation distance of post-operation was (0.85 ± 0.23) cm, showing statistically significant difference when compared with that of pre-operation (P lt; 0.05). The CT films showed fracture and dislocation of the posterior structure of pelvis had bony heal ing after 6 to 12 months. According to the Majeed grading system, the results were excellent in 5 cases, good in 4 cases, fair in 4 cases and poor in 1 case; the excellent and good rate was 64.29%. Conclusion Staged pelvic closure using external fixation combined with reconstruction plate for old pelvic fracture with pubic symphysis separation can reduce the pubic symphysis separation distance significantly. Satisfactory effects can be expected in treating the patients with TileB1 fracture.
Objective To review the research progress of pubic symphysis diastasis and provide effective reference for orthopedic surgeons in the diagnosis and treatment of pubic symphysis diastasis. MethodsThe anatomy, injury mechanism, treatment, and other aspects of pubic symphysis diastasis were summarized and analyzed by reviewing the relevant research literature at domestically and internationally in recent years. ResultsThe incidence of pubic symphysis diastasis is high in pelvic fractures, which is caused by the injury of the ligaments and fibrocartilage disc around the pubic symphysis by external force. The treatment plan should be individualized according to the pelvic stability and the needs of patients, aiming to restore the stability and integrity of the pelvis and improve the quality of life of patients after surgery. ConclusionAt present, the research on pubic symphysis diastasis still needs to be improved. In the future, high-quality, multi-center, and large-sample studies are of great significance for the selection of treatment methods and the evaluation of effectiveness for patients with pubic symphysis diastasis.