Objective To review the latest researches of synthetic biodegradable polymers for bone repair and reconstruction, to predict the progress of bone substitute materials and bone tissue engineering scaffolds in future. Methods The l iterature concerning synthetic biodegradable polymers as bone substitute materials or bone tissue engineering scaffolds was collected and discussed. Results Al i phatic polyester, polyanhydride, polyurethane and poly (amino acids) were the most extensively studied synthetic biodegradable polymers as bone substitutes and the scaffolds. Each polymer was of good biological safety and biocompatibil ity, and the degradation products were nontoxic to human body. The mechanical properties and degradation rate of the polymers could be adjusted by the type or number of the monomers anddifferent synthetic methods. Therefore, the polymers with suitable mechanical strength and degradation rate could be produced according to the different requirements for bone grafting. Prel iminary studies in vivo showed their favorable capacity for bone repair. Conclusion The synthetic biodegradable polymers, especially the copolymers, composite materials and those carrying bone growth factors are expected to be the most promising and ideal biomaterials for bone repair and reconstruction.
Objective To review recent advance in the application and research of three-dimensional digital knee model. Methods The recent original articles about three-dimensional digital knee model were extensively reviewed and analyzed. Results The digital three-dimensional knee model can simulate the knee complex anatomical structure very well. Based on this, there are some developments of new software and techniques, and good clinical results are achieved. Conclusion With the development of computer techniques and software, the knee repair and reconstruction procedure has been improved, the operation will be more simple and its accuracy will be further improved.
Objective To investigate the effectiveness of posterior lateral perforator flap in lower limb combined with free fibula for maxillary tissue defect repair. Methods Between December 2018 and December 2023, 16 patients with the maxillary malignant tumors were admitted. There were 10 males and 6 females, with an average age of 64.3 years (range, 54-75 years). There were 7 cases of maxillary gingival cancer, 5 cases of hard palate cancer, and 4 cases of maxillary sinus cancer. According to the 2017 American Joint Committee on Cancer (AJCC) TNM stage, there were 8 cases of stage Ⅲ, 6 cases of stage Ⅳa, and 2 cases of stage Ⅳb. After resection of the lesion, the remaining maxillary defects were classified into class Ⅱa in 3 cases, class Ⅱb in 5 cases, and class Ⅲb in 8 cases according to Brown’s classification. The size of soft tissue defects ranged from 4 cm×3 cm to 8 cm×6 cm. The posterior lateral perforator flap in lower limb in size of 5 cm×4 cm-9 cm×7 cm were harvested to repair soft tissue defects, and free fibula in length of 6-11 cm were used to repair bone defects. The donor sites of the lower limb were sutured directly (6 cases) or repaired with free skin grafting (10 cases). Six patients with positive lymph node pathology were treated with radiotherapy after operation. At 6 and 12 months after operation, the self-assessment was performed by the University of Washington Quality of Survival Questionnaire Form (QUW-4) in five dimensions (facial appearance, swallowing function, chewing function, speech function, and mouth opening), and swallowing function was evaluated by using the Kubota water swallowing test. Results Postoperative pathological examination showed that all patients were squamous cell carcinoma. One patient who was treated with radiotherapy developed osteomyelitis and 1 patient developed venous crisis of skin flap. The rest of the flaps and all skin grafts survived, and the wounds healed by first intention. All patients were followed up 1-5 years (mean, 2.8 years). Two patients died of local recurrence of the tumor at the 4th and 5th years after operation, respectively. Except for the chewing function score and total score at 6 months after operation, which showed significant differences compared to preoperative scores (P<0.05), there was no significant difference in other QUW-4 scale scores between different time points (P>0.05). The patients’ swallowing function evaluated by Kubota water swallowing test reached normal in 4 cases, suspicious in 9 cases, and abnormal in 3 cases at 6 months after operation, and 10, 6, and 0 cases at 12 months after operation, respectively. The swallowing function at 12 months was significantly better than that at 6 months (Z=–2.382, P=0.017). Conclusion The posterior lateral perforator flap in the lower limb combined with free fibula to repair maxillary tissue defects can repair soft and hard tissue defects at the same time, so that the patient’s facial appearance, swallowing function, chewing function, speech function, and mouth opening are satisfactorily restored and the mid-term effectiveness is good.
Objective To review the research progress and clinical prospect of three-dimensional spheroid culture of mesenchymal stem cells (MSCs). Methods Recent literature about three-dimensional spheroid culture of MSCs was summarized, mainly on the formation of MSCs spheroids collected by three-dimensional culture, differences between MSCs spheroids and MSCs collected by traditional two-dimensional culture, and the mechanism underlying these differences. Last, its clinical prospect was discussed. Results Compared with MSCs collected by traditional two-dimensional culture, MSCs spheroids collected by three-dimensional culture get a salient up-regulation in anti-apoptosis, multiple differentiation potential, paracrine, and anti-inflammatory effect, which may be related to the morphology and cytoskeleton organization, cell-to-cell contact and gap junctions, and the hypoxia microenvironment. The animal experiments show obvious effects in repair of refractory wounds, repair of ischemic injury, and tissue remodeling, so MSCs spheroid has broad clinical prospect. Conclusion MSCs spheroids collected by three-dimensional culture have stronger biological potential and treatment effect than MSCs collected by traditional two-dimensional culture, MSCs spheroids can be used to optimize stem cell therapy and improve its treatment effect.
Objective To investigate the effectiveness of anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) reconstruction combined with l imited open repair of medial collateral ligament (MCL) in recovering the stabil ity and the function of the knee. Methods Between April 2003 and October 2010, 14 patients (14 knees) with multi ple injuries of ACL, PCL, and MCL were treated. There were 10 males and 4 females with an average age of 41 years (range, 21- 71 years). Injury was caused by traffic accident in 11 cases and fall ing in 3 cases. The average time from injury to admissionwas 2 days (range, 1-4 days). Lysholm score was 17.00 ± 8.29, and the International Knee Documentation Committee (IKDC) score was 20.93 ± 8.28. The complicated injuries included dislocation of the knee joint in 9 cases and meniscus injury in 5 cases. Allogeneic tendons (2 cases) and autologous harmstring tendon (12 cases) were used to reconstruct ACL and PCL under arthroscopy, and all cases underwent limited open repair of MCL. Results All incisions healed by first intention. Numbness of the lower limb occurred in 3 cases and alleviated spontaneously. All patients were followed up 14 months on average (range, 12-18 months). The knee flexion was 120° and extension was 0° at 3 months of follow-up. After 1 year of follow-up, IKDC score and Lysholm score were 89.93 ± 6.26 and 88.93 ± 4.82, respectively, showing significant differences when compared with preoperative scores (P lt; 0.01). Conclusion For multi ple injuries of the knee ligaments, an arthroscope with limited open repair and reconstruction of the knee ligament can avoid open joint chamber, reduce postoperative articular adhesion, and encourage the joint function recovery.
ObjectiveTo investigate the effectiveness of autogenous tendon reconstruction under total arthroscopy in the treatment of chronic Achilles tendon rupture.MethodsBetween June 2015 and June 2018, 16 patients with chronic Achilles tendon ruptures were treated by autogenous tendon reconstruction under total arthroscopy. Of the 16 patients, 11 were males and 5 were females. Their mean age was 40.7 years (range, 21-55 years). The disease duration was 14-20 months (mean, 16.4 months). Preoperative American Orthopaedic Foot and Ankle Society (AOFAS) score was 41.2±2.2 and the pain visual analogue scale (VAS) score was 7.9±1.2. MRI and B-ultrasonography examinations showed that the Achilles tendon was not continuous. The length of Achilles tendon defect was 5.0-10.3 cm, with an average of 5.8 cm. The rupture of the Achilles tendon happened on top of the insertion of the tendon in 4 cases and at the tendon-muscle belly connection in 12 cases. The operation time, intraoperative blood loss, hospital stay, and related complications were recorded. The AOFAS score and VAS score were used to evaluate the improvement of ankle joint function and pain.ResultsThe average operation time was 77.2 minutes (range, 60-90 minutes). The average intraoperative blood loss was 20.5 mL (range, 15-30 mL). The average hospital stay was 7.2 days (range, 5-10 days). All incisions healed by first intention. There was no skin necrosis, infection, or deep vein thrombosis. All the patients were followed up 8-18 months, with an average of 12 months; and 10 cases were followed up more than 12 months. During the follow-up, there was no Achilles tendon re-rupture, and the symptoms of pain and heel lifting failure significantly improved. MRI reexamination showed that the continuity of Achilles tendon recovered. At 1, 3, 6, and 12 months postoperatively, AOFAS scores significantly improved and VAS scores significantly reduced, except for 1 month postoperatively, the scores at other time points were superior to that before operation, the differences were significant (P<0.05).ConclusionAutogenous tendon reconstruction under total arthroscopy in the treatment of chronic Achilles tendon rupture has the advantages of small trauma, rapid functional recovery, and satisfactory surgical efficacy.
Objective To investigate the short-term effectiveness of the anterior and middle columns in thoracolumbar tuberculosis reconstructed with whole autogenous spinous process-laminar bone through posterior approach. Methods The retrospective study included 78 patients with thoracolumbar tuberculosis who underwent posterior approach surgery and anterior and middle column bone graft reconstruction between January 2012 and May 2023. Based on the type of autogenous bone graft used, patients were divided into group A (whole autogenous spinous process-laminar bone graft, 38 cases) and group B (autogenous structural iliac bone graft, 40 cases). There was no significant difference of baseline data, such as age, gender, disease duration, involved segment of spinal tuberculosis, and preoperative erythrocyte sedimentation rate (ESR), C reactive protein (CRP), Oswestry disability index (ODI), visual analogue scale (VAS) score, the American Spinal Injury Association (ASIA) grade, segmental kyphotic angle, and intervertebral height between the two groups (P>0.05). The operation time, intraoperative blood loss, postoperative drainage, hospital stays, ESR, CRP, VAS score, ODI, bone fusion time, ASIA grade for neurological status valuation, postoperative complications, change of segmental kyphotic angle, change of intervertebral height were recorded and compared between the two groups. Results The operation time in group A was significantly shorter than that in group B (P<0.05); there was no significant difference in intraoperative blood loss, postoperative drainage, and hospital stays between the two groups (P>0.05). All patients in the two groups were followed up 14-110 months (mean, 64.1 months); there was no significant difference in the follow-up time between the two groups (P>0.05). The ESR, CRP, ODI, and VAS score at each time point after operation in both groups significantly improved when compared with those before operation, and further improved with the extension of time, the differences were significant (P<0.05). There was no significant difference between the two groups (P>0.05) except that the VAS score of group A was significantly better than that of group B at 3 days after operation (P<0.05). There was no significant difference in fusion time between the two groups (P>0.05). The neurological function of most patients improved after operation, and there was no significant difference in ASIA grade between the two groups at last follow-up (P>0.05). There was no significant difference in segmental kyphosis angle and intervertebral height between the two groups at each time point (P>0.05), and no significant difference in segmental kyphosis angle, intervertebral height correction and loss were found between the two groups (P>0.05). In group A, there was 1 case of incision fat liquefaction and 1 case of incision infection; in group B, there was 1 case of deep venous thrombosis, 2 cases of pleural effusion, and 10 cases of pain in bone harvesting area; in both groups, there were 2 cases of gout caused by hyperuricemia. There was a significant difference in the incidence of pain in bone harvesting area between the two groups (P<0.05), and there was no significant difference in the incidence of other complications between the two groups (P>0.05). ConclusionWhole autogenous spinous process-laminar bone grafting is equivalent to structural iliac bone graft in reconstruction of the anterior and middle columns in thoracolumbar tuberculosis through posterior approach, effectively supporting the stability of the anterior and middle columns of the spine, while resulting in shorter operation time and less postoperative pain in bone harvesting area.
Objective To review the current research progress of three-dimensional (3-D) printing technique in foot and ankle surgery. Methods Recent literature associated with the clinical application of 3-D printing technique in the field of medicine, especially in foot and ankle surgery was reviewed, summarized, and analyzed. Results At present, 3-D printing technique has been applied in foot and ankle fracture, segmental bone defect, orthosis, corrective surgery, reparative and reconstructive surgery which showed satisfactory effectiveness. Currently, there are no randomized controlled trials and the medium to long term follow-up is necessary. Conclusion The printing materials, time, cost, medical ethics, and multi-disciplinary team restricted the application of 3-D printing technique, but it is still a promising technique in foot and ankle surgery.
Objective To review the recent progress of the small intestinal submucosa (SIS) in application research of tissue repair and reconstruction. Methods The domestic and international articles on the SIS were reviewed and summarized. Results As a natural extracellular matrix, SIS has outstanding biological advantages, such as good mechanical property, tissue compatibility, and lower immunogenicity. SIS has been used to repair and reconstruct various types of tissue defects in animal models and clinical application, especially in the treatment of hernia, urinary system disease, and refractory skin trauma. The development of the tissue engineering technology expands the field of SIS repair and reconstruction and promotes the intensive study of SIS. However, the long-term effect of SIS in tissue repair and reconstruction still remains to be further observation, while the cell/SIS material construction by tissue engineering technology also needs more studies. Conclusion SIS has a widely promising application future in the tissue repair and reconstruction.
Objective To explore the feasibility and effectiveness of mixed reality technology for localizing perforator vessels in the repair of mandibular defects using free fibular flap. Methods Between June 2020 and June 2023, 12 patients with mandibular defects were repaired with free fibular flap. There were 8 males and 4 females, with an average age of 61 years (range, 35-78 years). There were 9 cases of ameloblastomas and 3 cases of squamous cell carcinomas involving the mandible. The disease duration ranged from 15 days to 2 years (median, 14.2 months). The length of mandibular defects ranged from 5 to 14 cm (mean, 8.5 cm). The area of soft tissue defects ranged from 5 cm×4 cm to 8 cm×6 cm. Preoperative enhanced CT scans of the maxillofacial region and CT angiography of the lower limbs were performed, and the data was used to create three-dimensional models of the mandible and lower limb perforator vessels. During operation, the mixed reality technology was used to overlay the three-dimensional model of perforator vessels onto the body surface for harvesting the free fibular flap. The length of the fibula harvested ranged from 6 to 15 cm, with a mean of 9.5 cm; the size of the flap ranged from 6 cm×5 cm to 10 cm×8 cm. The donor sites were sutured directly in 7 cases and repaired with free skin grafting in 5 cases. Results Thirty perforator vessels were located by mixed reality technology before operation, with an average of 2.5 vessels per case; the distance between the exit point of the perforator vessels located before operation and the actual exit point ranged from 1 to 4 mm, with a mean of 2.8 mm. All fibular flaps survived; 1 case had necrosis at the distal end of flap, which healed after dressing changes. One donor site had infection, which healed after anti-inflammatory dressing changes; the remaining incisions healed by first intention, and the grafts survived smoothly. All patients were followed up 8-36 months (median, 21 months). The repaired facial appearance was satisfactory, with no flap swelling. Among the patients underwent postoperative radiotherapy, 2 patients had normal bone healing and 1 had delayed healing at 6 months. Conclusion In free fibular flap reconstruction of mandibular defects, the use of mixed reality technology for perforator vessel localization can achieve three-dimensional visualization, simplify surgical procedures, and reduce errors.